B25G210 Acopian Power Supplies, B25G210 Datasheet - Page 4

• Manufacturer Part Number: B25G210
• Description: AC/DC POWER SUPPLY SNGL
• Manufacturer: Acopian Power Supplies

High Voltage DC-DC
MODULAR
REGULATED
Output ranges:
DC inputs from 21.6 to 32.0 volts may be used for
these versatile power supplies. Although their outputs are
continuously adjustable from 0 to their maximum ratings,
20-turn controls permit precise setability.
SPECIFICATIONS
Input Voltage: +21.6 to 32.0 Vdc.
Output Polarity: Positive output is standard. For negative
output, change first letter of model number from P to N.
Regulation (constant voltage operation):
Regulation (constant current operation):
Ripple: 0.05%, peak-to-peak.
Output Controls: Voltage and current may be controlled
by means of two 20-turn front panel adjustments, or by
using remotely located 1000 ohm potentiometers.
Output Programming: Output voltage and current may
be programmed from 0 to full rating by means of control
voltage inputs of 0 to +5.1 Vdc.
Voltage Monitor Terminal: Permits monitoring output
voltage, stepped down by ratio shown. Accuracy is 2% of
maximum rated output voltage.
Current Monitor Terminal: Permits monitoring output
current at mV/mA ratio shown. Accuracy is 2% of
maximum rated output current.
Inhibit Terminal: Grounding inhibits output.
Input Protection: “Soft start” circuit minimizes start-up
power stresses.
Output Protection: Current regulation circuit protects
power supply from short circuits, overload, and arcing.
• Shipped Within 6 Days
• Five Year Warranty
Line: ±0.05%
Load: ±0.05%
Line: ±0.1%
Load: ±0.1% plus 50 µA.
0 - 1,000 volts
It’s easy to find what you need at www.acopian.com or www.find a power supply.com
P.O. Box 638, Easton, PA 18044 • Phone: [phone] • FAX: [phone]
to
0 - 30,000 volts
These supplies have been designed to withstand severe
arcing and short circuits without damage. They are
ruggedly constructed with quality components to provide
many years of reliable service.
Efficiency: Greater than 70% at full load.
Response Time: Less than 5 mS for 100 µA load step
change.
Stability: 0.05% over eight hours, after 30 minute
warmup.
Temperature Coefficient: 200 PPM/°C = 0.02%/°C
(Typical).
Ambient Operating Temperature: –10 to +60°C.
No derating required.
Storage Temperature: –20 to +85°C.
Humidity: Maximum of 90% relative, non-condensing.
Connections: 24˝ flying lead for high side of output
and 5-way binding post for return (ground). All other
connections on pluggable terminal block.
Mounting: Threaded mounting holes permit mounting to
a chassis, cabinet wall or bracket, or they may be used
on a test bench or tabletop. To mount from the power
supply side of the mounting surface or for DIN rail
mounting, see accessory Mounting Kits on page 37.
OPTIONS
Output Connector: Models with an output of 5000 volts
or less can be provided with an MHV connector (and 8´
long detachable shielded output cable with mating MHV
connector installed) instead of the flying lead. To order,
add suffix letter “T” to the model number and $50.00 to
price.
2