OPB930 Optek Technology, Inc., OPB930 Datasheet - Page 3

• Manufacturer Part Number: OPB930
• Description: Photologic?? Slotted Optical Switch
• Manufacturer: Optek Technology, Inc.

Photologic® Slotted Optical Switch
OPB930 and OPB940 (L and W Series)
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone]
Absolute Maximum Ratings
Input Infrared LED
Output Photologic®
Total Device Power Dissipation
Notes:
Supply Voltage, V
Operating Temperature Range
Storage Temperature Range
Input Diode Power Dissipation
Output Photologic® Power Dissipation
Voltage at Output Lead (Open Collector Output)
Diode Forward DC Current
Diode Reverse DC Voltage
(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(2) Derate linearly 2.22 mW/°C above 25°.
(3) Derate linearly 4.44 mW/°C above 25°.
(4) Derate linearly 6.66 mW/°C above 25°.
(5) OPB930L/OPB940L series devices are terminated with 0.020” square leads designed for PCBoard mounting.
(6) OPB930W/OPB940W series devices are terminated with 7 strands of 24” 26 AWG UL1429 insulated wire on each terminal.
(7) Methanol and isopropanol are recommended as cleaning agents. Plastic housing is soluble in chlorinated hydrocarbons and
(8) All parameters tested using pulse technique.
Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron]
Insulation functions and colors are: anode (red), IRED cathode (black), V
wire lengths and/or colors or customer-selected connectors, please contact your local representative or call the factory.
ketones.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
CC
(not to exceed 3 seconds)
(4)
(2)
FAX: [phone] [e-mail] www.optekinc.com
(T
A
=25°C unless otherwise noted)
(3)
CC
(white), output (blue), ground (green). For other
(1)
-40°C to +70° C
-40°C to +85° C
Issue A.1
100 mW
200 mW
300 mW
Page 3 of 7
260° C
40 mA
10 V
35 V
05/07
2 V