UP018D02-1 DATAMODUL, UP018D02-1 Datasheet - Page 30

• Manufacturer Part Number: UP018D02-1
• Description: NTSC Color TFT
• Manufacturer: DATAMODUL

7.Inspection judgement:
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
7-1.The judgement of the shipped lot(acceptance or rejection) shall follow the
7-2. If the number of defects is equal to or less than the applicable acceptance
7-3. If the number of defects is more than the applicable acceptance level,the lot
sampling plan of MIL-STD-105E,single sampling,normal inspection, level Ⅱ.
6-2-4.Following defect to be judged by limit samples when it is necessary.
6-2-3.After image:
level,the lot shall be accepted.
shall be rejected and the buyer should inform the seller of the result of
incoming inspection in writing.
After displaying the checkerboard pattern for
then switch to the white pattern, the previous pattern should disappear
within 10 seconds.
Note:The spec above is acceptable for now. If there is any problem raised,
A.Rubbing mark
B.Mottling ( uniformity)
both sides have to negociate for solution before to modify the spec.
2 hours at room temperature
Spec. No.
Version
Page
: 413-212-091
: 1
:
28
/28