TIG004SS Sanyo Semicon Device, TIG004SS Datasheet - Page 3

• Manufacturer Part Number: TIG004SS
• Description: Light-Controlling Strobe Applications
• Manufacturer: Sanyo Semicon Device

www.DataSheet4U.com
Note 1 : The gate series resistance R G must be 30 or more to protect the device when it is turned off.
Note 2 : The collector current gradient di/dt must be smaller than 150A/ s and the collector voltage gradient dv/dt must be smaller than 400V/ s to
160
140
120
100
80
60
40
20
0
protect the device when it is turned off.
0
CM=240 F
This catalog provides information as of February, 2004. Specifications and information herein are subject
to change without notice.
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
1
Gate-to-Emitter Voltage, V GE -- V
2
Tc=25 C
I CP -- V GE
3
Tc=70 C
4
5
6
7
IT04219
TIG004SS
8
400
350
300
250
200
150
100
50
0
0
20
Collector Current(Pulse), I CP -- A
40
60
CM -- I CP
80
100
120
V CM =350V
Tc 70 C
V GE =4V
RG 30
PS
No.7397-3/3
140
IT04220
160