BS-115C Bestar, BS-115C Datasheet - Page 6

• Manufacturer Part Number: BS-115C
• Description: Miniature Relay
• Manufacturer: Bestar

JM Elektronik
Ul. Karolinki 58
44-100 Gliwice
5. Cooling
6. Washing
7. Coating
www.DataSheet4U.com
Process
Relay Soldering and Washing Guidelines
•
•
•
•
•
•
•
•
* Do not coat dust-cover type relays and flux-resistant type relays.
* Depending on the type, some coating materials may have an adverse affect on relays,
select coating materials carefully.
Immediate air cooling is recommended to prevent deterioration of the relay and
surrounding parts due to soldering heat.
Although the sealed type relay can be cleaned, avoid immersing the relay into cold liquid
(such as washing solvent) immediately after soldering. Doing so may deteriorate the
sealing performance.
Do not wash flux-resistant type relays and dust cover type relays by immersion.
Careless washing may cause washing solvent to penetrate the relay.
Plastic sealed type relays can be washed by immersion. Use washing solvents shown in
Table 6.
Use of other washing solvents may damage the relay case and cover, and also cause
washing solvent to penetrate the relay,
Washing with the boiling methods is recommended. Avoid ultrasonic washing on relays.
Use of ultra-sonic cleaning may cause breaks in the coil or slight sticking of contacts due
to the ultrasonic energy.
If the PC board is to be coated to prevent the insulation of the PC board from
deteriorating due to corrosive gases and high temperature, note the following.
tel: [phone]
fax: [phone]
e-mail: [e-mail]
Guidelines
Strona 6 z 6