HP4100 ETC, HP4100 Datasheet - Page 2

• Manufacturer Part Number: HP4100
• Description: Print
• Manufacturer: ETC

Photo 5
2
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com
Notes
Photo 4
Photo 6
Photo 7
Photo 8
Photo 9
Step 4
Using neddlenose pliers, grasp the metal
shaft of the PCR. Carefully lift and remove
the PCR.
(See Photo 4)
NOTE: Clean the PCR using mild soap and
water.
Step 5
Photo 5 shows a reinforcement feature of
the cartridge. To remove the cartridge
pins, use a soldering iron with a small tip
and melt the plastic wall.
(See Photo 6)
Step 6
Once the pins are visible use a long punch
or bent extraction tool to push the pins
out from the inside on both ends of the
cartridge.
Step 7
With the pins removed, separate the two
sections. Set the toner hopper aside.
Step 8
Remove the two screws holding the wiper
blade and remove the blade.
(See Photo 8)
Step 9
Dump out the waste hopper. Using dry
compressed air or a vacuum, clean out the
hopper.
Step 10
Clean the PCR saddles with a swab and
alcohol. Add conductive grease to the
conductive (black) PCR saddle.
Step 11
To remove the drum shutter lift the drum
shutter arm spring and latch it on the
notch of the arm.
HP4100 Technical Instructions
(See Photo 9)
(See Photo 7)