MAX5137 Maxim Integrated Products, MAX5137 Datasheet - Page 15

• Manufacturer Part Number: MAX5137
• Description: (MAX5134 - MAX5137) Voltage-Output DACs
• Manufacturer: Maxim Integrated Products

www.datasheet4u.com
Offset error indicates how well the actual transfer func-
tion matches the ideal transfer function at a single point.
Typically, the point at which the offset error is specified is
at or near the zero-scale point of the transfer function.
Gain error is the difference between the ideal and the
actual full-scale output voltage on the transfer curve,
after nullifying the offset error. This error alters the slope
of the transfer function and corresponds to the same
percentage error in each step.
The settling time is the amount of time required from the
start of a transition, until the DAC output settles to the new
output value within the converter’s specified accuracy.
Digital feedthrough is the amount of noise that appears
on the DAC output when the DAC digital control lines
are toggled.
______________________________________________________________________________________
Digital Feedthrough
Settling Time
16-/12-Bit, Voltage-Output DACs
Offset Error
Gain Error
Pin-/Software-Compatible,
A major carry transition occurs at the midscale point
where the MSB changes from low to high and all other
bits change from high to low, or where the MSB
changes from high to low and all other bits change from
low to high. The duration of the magnitude of the
switching glitch during a major carry transition is
referred to as the digital-to-analog glitch impulse.
The digital-to-analog power-up glitch is the duration of
the magnitude of the switching glitch that occurs as the
device exits power-down mode.
Crosstalk is the amount of noise that appears on a DAC
output set to 0 when the other DAC is updated from 0 to
AVDD
PROCESS: BiCMOS
Digital-to-Analog Power-Up Glitch Impulse
Digital-to-Analog Glitch Impulse
DC DAC-to-DAC Crosstalk
Chip Information
15