LM048V2 LM TECHNOLOGIES, LM048V2 Datasheet - Page 9

• Manufacturer Part Number: LM048V2
• Manufacturer: LM TECHNOLOGIES

6.6 Installation Procedure
Step 1:
Step 2:
Step 3:
Step 4:
Note:
7. Usage
7.1 HyperTerminal Settings
7.2 Configuration Start-up
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
You can reprogram the adapter settings using HyperTerminal.
Bits per second: 19200 bps (baud rate)
Data bit: 8
Parity: None
Stop bit: 1
Flow control: None
Plug the adapter into the COM port of device.
Adjust the slide switch, depending on whether the device is a
DCE or DTE.
Power the adapter on.
Configure the adapter if necessary.
The UART settings on adapter should match the COM Port
settings on the device.
Plug the adapter into a COM port of PC.
Power the adapter on.
Create a HyperTerminal file.
On the interface of the new Hyper Terminal file, click Properties
Button.
Select the COM port where the adapter is attached to your PC
and set the port properties as described in section 7.1 Hyper
Terminal Settings.
6