DF19G-14P-1HGND Hirose Electric, DF19G-14P-1HGND Datasheet - Page 11

• Manufacturer Part Number: DF19G-14P-1HGND
• Description: 1 mm-Pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable12 pages, 862.55 KbOriginal
• Manufacturer: Hirose Electric

B
Soldering Temperature Profile
1. Recommended temperature profile
2. Recommended manual soldering conditions
3. Recommended screen thickness
4. Warpage of board
5. Cleaning
6. Wiring
7. Precautions
Soldering iron temperature 290 ±10ç, soldering time 3 seconds or less
0.15mm
Max. 0.03mm at the connector center with the connector ends as the reference.
See the separate “Guide to Hirose Nylon connectors.”
See the separate “Guide to Hirose Nylon connectors.”
As crimp terminals are extremely small, crimping must be performed with care: observe
the directions in the “Crimping Condition Sheet” and “Crimping Standard Sheet.”
Due to the ultra miniature design care needs to be taken when disconnecting to avoid
accidental damage.
(Note 1) The temperature profile can be applied twice with the normal temperature profile.
(Note 2) The temperature is measured at the connector lead.
11