TC2015 Microchip Technology, TC2015 Datasheet - Page 9

• Manufacturer Part Number: TC2015
• Description: (TC2xxx) 50 mA / 100 mA / 150 mA CMOS LDOs with Shutdown and Reference Bypass
• Manufacturer: Microchip Technology

3.0
The descriptions of the pins are described in Table 3-1.
TABLE 3-1:
3.1
Connect unregulated input supply to the V
there is a large distance between the input supply and
the LDO regulator some input capacitance is neces-
sary for proper operation. A 1 µF capacitor connected
from V
applications.
3.2
Connect the unregulated input supply ground return to
GND. Also connect one side of the 1 µF typical input
decoupling capacitor close to this pin and one side of
the output capacitor C
1
2
3
4
5
Pin No.
2003 Microchip Technology Inc.
IN
PIN DESCRIPTIONS
Unregulated Supply Input (V
Ground Terminal (GND)
to ground is recommended for most
Symbol
Bypass
SHDN
V
GND
V
OUT
IN
PIN FUNCTION TABLE
OUT
Reference bypass input
Unregulated supply input
Ground terminal
Shutdown control input
Regulated voltage output
to this pin.
Description
IN
IN
pin. If
)
3.3
The regulator is fully enabled when a logic high is
applied to SHDN. The regulator enters shutdown when
a logic low is applied to this input. During shutdown,
output voltage falls to zero and supply current is
reduced to 0.5 µA (max).
3.4
Connecting a low value ceramic capacitor to this pin
will further reduce output voltage noise and improve the
Power Supply Ripple Rejection (PSRR) performance
of the LDO. Typical values from 470 pF to 0.01 µF are
suggested. Smaller and larger values can be used but
do affect the speed at which the LDO output voltage
rises when input power is applied. The larger the
bypass capacitor, the slower the output voltage will
rise.
3.5
Connect the output load to V
nect one side of the LDO output de coupling capacitor
as close as possible to the V
TC2014/2015/2185
Shutdown Control Input (SHDN)
Reference Bypass Input (Bypass)
Regulated Voltage Output (V
OUT
OUT
of the LDO. Also con-
pin.
DS21662C-page 9
OUT
)