NL10276AC28-01L Renesas Electronics Corporation., NL10276AC28-01L Datasheet - Page 34

• Manufacturer Part Number: NL10276AC28-01L
• Description: 36 Cm 14.1 Inches, 1024 X 768 Pixels, Full-color, Multi-scan Function, Built-in Crt Interface Board
• Manufacturer: Renesas Electronics Corporation.

GENERAL CAUTIONS
(1) Caution when taking out the module
(2) Cautions for handling the module
(3) Cautions for the atmosphere
(4) Caution for the module characteristics
34
Because next figures and sentences are very important, please understand these contents as follows.
Pick the pouch only, in taking out module from a carrier box.
a) As the electrostatic discharges may break the LCD module, handle the LCD module with care against
b)
c) As the surface of polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for
d) Do not pull the interface connectors in or out while the LCD module is operating.
e) Put the module display side down on a flat horizontal plane.
f)
g) When the module is operating, do not lose CLK, HS or Vsync signal. If any one of these signals is lost, the
h) The torque to mounting screw should never exceed 0.392 N·m (4 kgf·cm).
a) Dew drop atmosphere should be avoided.
b) Do not store and/or operate the LCD module in a high temperature and/or high humidity atmosphere.
c) This module uses cold cathod fluorescent lamps. Therefore, the life time of the lamps becomes short
d) Do not operate the LCD module in a high magnetic field.
a) Do not apply the fixed pattern for a long time to the LCD module at product againg. Applying fixed pattern
Do not touch an inverter - - on which is stuck a caution label - - while the LCD module is under the operation,
because of dangerous high voltage.
CAUTION
electrostaic discharges.
cleaning.
Handle connectors and cables with care.
LCD panel would be damaged.
Storage in an electro-conductive polymer packing pouch and under relatively low temperature atmosphere,
is recommended.
conspicuously at low temperature.
for a long time may cause image sticking.
CAUTION
This figure is a mark that you will get an electric shock when you make a mistake to operate.
This figure is a mark that you will get hurt when you make a mistake to operate.
As the LCD panel and backlight element are made from fragile glass material, impulse and
pressure to the LCD module should be avoided.
This figure is a mark that you will get hurt and/or the module will have damages
when you make a mistake to operate.
Data Sheet EN0444EJ1V0DS00
NL10276AC28-01L