NL10276AC28-01L Renesas Electronics Corporation., NL10276AC28-01L Datasheet - Page 10

• Manufacturer Part Number: NL10276AC28-01L
• Description: 36 Cm 14.1 Inches, 1024 X 768 Pixels, Full-color, Multi-scan Function, Built-in Crt Interface Board
• Manufacturer: Renesas Electronics Corporation.

(4) OSD MENU SELECT
10
How to adjust
V
V
GND
GNDB
Notes 1: This terminal becomes effective only when the value of Button Sel is 7.
Notes 1: If OSD menu type is changed, the adjustment of the type becomes default value.
DD
DDB
OSD menu type
Symbol
MENUSEL
2: Ground for system (GND) and backlight (GNDB) are not connected in the module.
3: 12 V for backlight should be started up within 300 ms, othernise, the protection circuit makes the
2: The Initial value of Contrast ratio is as follows.
3: On Screen Display
Detail of the functions is mentioned in Page 27 INITIAL VALUE CHANGE FUNCTIONS.
backlight turn off.
Then, It takes 5 seconds to display the changed menu after the supply voltage is input again.
And, Indicators for both LEDON and LEDOFF are “ON” at one time during the 5 seconds.
Hierarchical type: 128:1 (typ.)
Toggle type: 100:1 (typ.)
Application with the OSD function might conflict with patents in Europe and/or the U.S.A.
If you apply the OSD function, appreciate the patents at your side.
I/O
–
–
–
–
For details, see Page 27 INITIAL VALUE
CHANGE FUCNTIONS.
Logic
Auto Adjust
Brightness
Clock
Position
Contrast
–
–
–
–
Hierarchical type
“H” or “open”
MENU
Power supply for Logic and LCD driving +12 V ( 5%)
Power supply for backlight +12 V ( 5%)
Ground for system
Ground for backlight
Data Sheet EN0444EJ1V0DS00
For details, see Page 27 INITIAL VALUE
CHANGE FUCNTIONS.
Description
NL10276AC28-01L
Toggle type
“L”