PN5331B3HN NXP Semiconductors, PN5331B3HN Datasheet - Page 2

• Manufacturer Part Number: PN5331B3HN
• Description: Near Field Communication Nfc Controller
• Manufacturer: NXP Semiconductors

NXP Semiconductors
2. Features
PN5331B3HN_SDS_N_1
Product short data sheet
Standards compliancy
PN5331B3HN offers commands in order for applications to be compliant with
“Paypass-ISO/IEC 14443 Implementation v1.1” and “EMV Contactless Communication
Protocol Specification v2.0”.
PN5331B3HN supports RF protocols ISO/IEC 14443A and B such as compliancy with
Smart eID standard can be achieved at application level.
A dedicated command is implemented in PN5331B3HN firmware to support NFC secure
applications in accordance with “NFC sec Security layer for NFC” specification in order to
enable USB wireless or BT enabler applications in a host baseband.
80C51 microcontroller core with 45056 bytes ROM and 1224 bytes RAM
Highly integrated demodulator and decoder
Buffered output drivers to connect an antenna with minimum number of external
components
Integrated RF level detector
Integrated data mode detector
Supports ISO/IEC 14443A Reader/Writer mode up to 848 kbit/s
Supports ISO/IEC 14443B Reader/Writer mode up to 848 kbit/s
Supports MIFARE encryption in Reader/Writer mode and higher transfer speed
communication at 212 kbit/s, 424 kbit/s and 848kbit/s
Supports contactless communication according to the FeliCa protocol at 212 kbit/s and
424 kbit/s
Typical operating distance in Reader/Writer mode for communication to
ISO/IEC 14443A/MIFARE, ISO/IEC 14443B or FeliCa cards up to 50 mm depending
on antenna size and tuning
Support NFCIP-1 mode up to 424 kbit/s
Typical operating distance in NFCIP-1 mode up to 50 mm depending on antenna size,
tuning and power supply
Supported USB 2.0 full speed interface
Restricted I
card reader
Low power modes
27.12 MHz Crystal oscillator
On-Chip PLL to generate internally 96 MHz for the USB interface
Power modes
Dedicated IO ports for external device control
Hard-Power-Down mode
Soft-Power-Down mode
USB bus power mode
2.5 V to 3.6 V power supply operating range in non USB bus power mode
2
C master interface to control an external I
Rev. 01 - 31 December 2008 — 4 March
2009
Near Field Communication (NFC) controller
2
C EEPROM or TDA8029 smart
PN5331B3HN
© NXP B.V. 2009. All rights reserved.
2 of 9