HT46R63 Holtek Semiconductor Inc., HT46R63 Datasheet - Page 25

• Manufacturer Part Number: HT46R63
• Description: Ht46r63/ht46c63 -- A/d With Lcd Type 8-bit Mcu
• Manufacturer: Holtek Semiconductor Inc.

Application Circuits
The following table shows the C1, C2 and R1 values corresponding to the different crystal values. (For reference only)
Note:
Rev. 2.30
4MHz Crystal
4MHz Resonator
3.58MHz Crystal
3.58MHz Resonator
2MHz Crystal & Resonator
1MHz Crystal
480kHz Resonator
455kHz Resonator
429kHz Resonator
The function of the resistor R1 is to ensure that the oscillator will switch off should low voltage condi-
tions occur. Such a low voltage, as mentioned here, is one which is less than the lowest value of the
MCU operating voltage.
The resistance and capacitance for reset circuit should be designed in such a way as to ensure that the VDD is
stable and remains within a valid operating voltage range before bringing RES to high.
interference.
* Make the length of the wiring, which is connected to the RES pin as short as possible, to avoid noise
Crystal or Resonator
C1, C2
300pF
300pF
300pF
10pF
25pF
25pF
35pF
0pF
0pF
25
9.1k
10k
12k
10k
10k
10k
27k
10k
10k
HT46R63/HT46C63
R1
March 22, 2006