TLE84106EL Infineon Technologies, TLE84106EL Datasheet - Page 26

• Manufacturer Part Number: TLE84106EL
• Manufacturer: Infineon Technologies

Specifications of TLE84106EL

• Packages: PG-SSOP-24
• Ipeak: 6 x 0.8
• Inhibit: y
• Iq (typ): 2.0 µA
• Mounting: SMIT
• Technology: BCD

7
Note: The following simplified application examples are given as a hint for the implementation of the device only
7.1
Figure 17
For optimum EMC performance, a ferrite is recommended to be placed in series and as close as possible to the
Vdd line of the TLE841xy device. This is shown in the above application diagram example. The ferrite should have
an impedance of 1000ohm at an effective frequency of 100MHz frequency. A recommended ferrite is the
MMZ1608 type series available in a geometry size of 0603 with a DC resistance of 0.6ohm and allowable DC
current of 190mA.
Data Sheet
and shall not be regarded as a description or warranty of a certain functionality, condition or quality of the
device. The function of the described circuits must be verified in the real application.
Application Information
Application Diagram
Application Example for DC-motor Loads
26
Application Information
Hex Half Bridge IC
Rev. 1.0, 2010-04-27
TLE84106EL