1658296-1 TE Connectivity, 1658296-1 Datasheet - Page 6
![](/photos/41/65/416568/pr1658296_sml.jpg)
1658296-1
Manufacturer Part Number
1658296-1
Description
Manufacturer
TE Connectivity
Specifications of 1658296-1
Product Type
PT Connector Assembly
Profile
Standard
Termination Type
Press-Fit
Configuration
1 x 2
Pcb Mount
Single Sided
Termination Post Length (mm [in])
1.95 [0.076]
Number Of Positions
40
Contact Plating, Mating Area, Material
Gold (30)
Contact Base Material
Phosphor Bronze
Connector Style
Receptacle
Cage Type
Stacked
Housing Color
Black
Ul Flammability Rating
UL 94V-0
Housing Material
Liquid Crystal Polymer (LCP)
Lightpipe
Without
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Application
SFP
Packaging Method
Tray
4.
4.1.
4.2.
4.3.
4.4.
Rev C
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form , fit or function are m ade to the product or m anufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of the original testing
sequence as determ ined by developm ent/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that the product m eets the requirem ents of Figure 1. Failures
attributed to equipm ent, test setup or operator deficiencies shall not disqualify the product. If product
failure occurs, corrective action shall be taken and specim ens resubm itted for qualification. Testing to
confirm corrective action is required before resubm ittal.
Quality Conform ance Inspection
The applicable quality inspection plan shall specify the sam pling acceptable quality level to be used.
Dim ensional and functional requirem ents shall be in accordance with the applicable product drawing
and this specification.
Specim en Selection
Specim ens shall be prepared in accordance with applicable Instruction Sheets and shall be
selected at random from current production. Each test group shall consist of 4 specim ens.
Test Sequence
Qualification inspection shall be verified by testing specim ens as specified in Figure 2.
108-2161
6 of 6