881594-1 TE Connectivity, 881594-1 Datasheet - Page 6
![](/photos/41/62/416286/pr171631_sml.jpg)
881594-1
Manufacturer Part Number
881594-1
Description
Manufacturer
TE Connectivity
Series
070r
Specifications of 881594-1
Product Line
Econoseal J
Product Type
Contact
Wire/cable Type
Discrete Wire
Cable Type
Thin Wall
Termination Method To Wire/cable
Crimp
Wire/cable Size (awg)
15.5 – 17
Wire/cable Size (mm²)
1 – 1.5
Profile Height (y-axis) (mm [in])
0.64 [0.025]
Wire Type
Stranded
Length (x-axis) (mm [in])
20.40 [0.8031]
Width (z-axis) (mm [in])
1.80 [0.0708]
Contact Type
Tab
Contact Base Material
Brass
Contact Plating, Mating Area, Material
Pre-Tin
Contact Plating, Mating Area, Thickness (µm [?in])
0.76 [29.92]
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Applies To
Wire/Cable
Accepts Wire Insulation Diameter, Range (mm [in])
1.40 – 2.40 [0.055 – 0.094]
Application Use
Wire-to-Wire
Contact Transmits (typical Application)
Power
Packaging Method
Reel
Packaging Quantity
6000
Housing Ass’y 6p Rec. & Tab Hybrid Jr. Power Timer / Multi Lock
Revisão “B”
4.5.12
4.5.13
4.5.14
4.5.15
4.5.16
4.5.17
4.5.18
4.5.19
ITEM
Connector to Connector
Connector Polarization
Disengagement Force
Disengagement Force
Un-Locked Connector
Feature Effectiveness
Isolation Resistance
Engagement Force
Locked Connector
Dielectric Strength
Terminal Position
Flammability
Assurance
TEST
CONNECTOR SYSTEM MECHANICAL TESTS
when tested according to GMW 3232 shall be
occur between cavities at any time during the
occur between the cavities and the outside of
TPA closing force with correct assembled
Damages do not have to occur that harm a
No dielectric breakdown or flash-over shall
No dielectric breakdown or flash-over shall
The burn rate of the material test samples
Electric continuity does not have to occur;
TPA closing force with one improperly
partially inserted terminal shall be greater
The closing force with one improperly or
a connector at any time during the test.
It does not have to allow assembly;
(with all the inserted terminals).
than 60 N for all terminal sizes.
12,5N minimum Hsg assy rec;
20N minimum Hsg assy tab.
17N minimum Hsg assy rec;
25N minimum Hsg assy tab.
Closed TPA locking force:
100 Mega-Ohms minimum.
less than 100 mm/min.
TPA Pre-Lock Force:
inserted terminal:
REQUIREMENTS
correct assembly.
100N maximum.
100N minimum.
30N maximum.
75N maximum.
terminals:
test;
terminal in housing with
terminal in housing with
in housing with a speed
samples during 3 to 23
500VDC / 15 seconds.
in all the ways, guiding
female, with terminals
them in incorrect way.
To extraction the TPA
rate of 50 10mm/min
connectors male and
together at a uniform
of 50±10mm/minute.
until fully seated and
flammability test per
1000Vac / 1 minute.
To try to mount the
To apply a force of
50±10mm/minute.
50±10mm/minute.
between 45-70%;
To extraction the
To extraction the
Mate connectors
hours ±5ºC, with
To condition the
relative humidity
PROCEDURES
Perform the
GMW 3232
a speed of
a speed of
locked.
150N.
108-37083
6 de 8