LPC11U23FBD48 NXP Semiconductors, LPC11U23FBD48 Datasheet - Page 47

The LPC11U23FBD48 is a ARM Cortex-M0 based, low-cost 32-bit MCU, designed for 8/16-bit microcontroller applications, offering performance, low power, simple instruction set and memory addressing together with reduced code size compared to existing 8/

LPC11U23FBD48

Manufacturer Part Number
LPC11U23FBD48
Description
The LPC11U23FBD48 is a ARM Cortex-M0 based, low-cost 32-bit MCU, designed for 8/16-bit microcontroller applications, offering performance, low power, simple instruction set and memory addressing together with reduced code size compared to existing 8/
Manufacturer
NXP Semiconductors
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
LPC11U23FBD48/301,
Manufacturer:
Intersil
Quantity:
71
Part Number:
LPC11U23FBD48/301,
Manufacturer:
NXP Semiconductors
Quantity:
10 000
NXP Semiconductors
[7]
[8]
[10] A Fast-mode I
LPC11U2X
Product data sheet
[9]
Fig 23. I
In Fast-mode Plus, fall time is specified the same for both output stage and bus timing. If series resistors are used, designers should
allow for this when considering bus timing.
The maximum t
t
SCL signal. If the clock stretches the SCL, the data must be valid by the set-up time before it releases the clock.
tSU;DAT is the data set-up time that is measured with respect to the rising edge of SCL; applies to data in transmission and the
acknowledge.
This will automatically be the case if the device does not stretch the LOW period of the SCL signal. If such a device does stretch the
LOW period of the SCL signal, it must output the next data bit to the SDA line t
Standard-mode I
VD;ACK
SDA
SCL
by a transition time (see UM10204). This maximum must only be met if the device does not stretch the LOW period (t
2
C-bus pins clock timing
70 %
30 %
S
2
t
C-bus device can be used in a Standard-mode I
f
HD;DAT
2
C-bus specification) before the SCL line is released. Also the acknowledge timing must meet this set-up time.
t
f
could be 3.45 s and 0.9 s for Standard-mode and Fast-mode but must be less than the maximum of t
70 %
30 %
1 / f
SCL
t
HD;DAT
70 %
30 %
70 %
30 %
All information provided in this document is subject to legal disclaimers.
t
SU;DAT
Rev. 2 — 13 January 2012
70 %
30 %
2
C-bus system but the requirement t
t
LOW
r(max)
t
HIGH
+ t
32-bit ARM Cortex-M0 microcontroller
70 %
30 %
SU;DAT
t
VD;DAT
= 1000 + 250 = 1250 ns (according to the
SU;DAT
= 250 ns must then be met.
LPC11U2x
© NXP B.V. 2012. All rights reserved.
002aaf425
LOW
VD;DAT
47 of 70
) of the
or

Related parts for LPC11U23FBD48