104652-1 TE Connectivity, 104652-1 Datasheet - Page 3

• Manufacturer Part Number: 104652-1
• Manufacturer: TE Connectivity

Specifications of 104652-1

• Connector Type: Connector Assembly
• Mount Angle: Vertical
• Pcb Mount Retention: With
• Mating Connector Lock: Without
• Hold-down Post Material: Copper Alloy
• Hold-down Post Plating: Tin-Lead (150) over Nickel (50)
• Insulation Resistance (m?): 5,000
• Voltage (vac): 30
• Dielectric Withstanding Voltage (v): 300
• Contact - Rated Current (a): 1 – 4
• Solder Tail Contact Plating: Tin-Lead (150)
• Number Of Positions: 10
• Pcb Mount Retention Type: Hold Down Post(s)
• Contact Base Material: Copper Alloy
• Contact Plating, Mating Area, Material: Gold (30)
• Underplate Material: Nickel
• Connector Style: Receptacle
• Mating Alignment: With
• Mating Alignment Type: Polarizing Tab
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: ELV compliant, 5 of 6 Compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Approved Standards: UL E28476, CSA LR7189
• Temperature Range (°c): -65 – +105
• Packaging Method: Tube

Physical shock.
Durability.
Contact retention.
Mating force.
Unmating force.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Rev C
Test Description
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
Contacts shall not dislodge from
circuit cavity.
6.4 ounces maximum per contact.
1 ounce minimum per contact.
See Note.
See Note.
See Note.
Figure 1 (continued)
ENVIRONMENTAL
Requirement
EIA-364-27, Method G.
Subject mated specimens to 100
G's sawtooth shock pulses of 6
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 5.
EIA-364-9.
Mate and unmate specimens for
200 cycles at maximum rate of 150
cycles per hour.
EIA-364-29.
Apply axial load of .25 pound to
header and .40 pound to receptacle
in mating direction to solder tails of
header and receptacle.
EIA-364-9.
Measure force necessary to mate
specimens a distance of .060 inch
from point of initial contact at
maximum rate of .5 inch per minute.
EIA-364-9.
Measure force necessary to unmate
specimens at maximum rate of .5
inch per minute.
EIA-364-32, Test Condition II.
Subject mated specimens to 10
cycles between -65 and 105°C.
EIA-364-31, Method III.
Subject specimens to 10 cycles (10
days) between 25 and 65°C at 80 to
100% RH.
EIA-364-17, Method A, Test
Condition 4, Time Condition C.
Subject mated specimens to 105°C
for 500 hours.
Procedure
108-1332
3 of 7