AD7324 Analog Devices, AD7324 Datasheet - Page 27

• Manufacturer Part Number: AD7324
• Description: Software Selectable True Bipolar Input, 4-Channel, 12-Bit Plus Sign A/D Converter
• Manufacturer: Analog Devices

Specifications of AD7324

• Resolution (bits): 13bit
• # Chan: 4
• Sample Rate: 1MSPS
• Interface: Ser,SPI
• Analog Input Type: Diff-Bip,Diff-Uni,SE-Uni
• Ain Range: Bip (Vref),Bip (Vref) x 2,Bip (Vref) x 4,Bip 10V,Bip 2.5V,Bip 5.0V,Uni (Vref) x 4,Uni 10V
• Adc Architecture: SAR
• Pkg Type: SOP

REFERENCE
The AD7324 can operate with either the internal 2.5 V on-chip
reference or an externally applied reference. The internal reference
is selected by setting the Ref bit in the control register to 1. On
power-up, the Ref bit is 0, selecting the external reference for the
AD7324 conversion. Suitable reference sources for the AD7324
include AD780, AD1582, ADR431, REF193, and ADR391.
The internal reference circuitry consists of a 2.5 V band gap
reference and a reference buffer. When operating the AD7324
in internal reference mode, the 2.5 V internal reference is available
at the REFIN/OUT pin, which should be decoupled to AGND
using a 680 nF capacitor. It is recommended that the internal
reference be buffered before applying it elsewhere in the system.
The internal reference is capable of sourcing up to 90 μA.
On power-up, if the internal reference operation is required for
the ADC conversion, a write to the control register is necessary
Rev. A | Page 27 of 36
to set the Ref bit to 1. During the control register write, the
conversion result from the first initial conversion is invalid. The
reference buffer requires 500 μs to power up and charge the
680 nF decoupling capacitor during the power-up time.
The AD7324 is specified for a 2.5 V to 3 V reference range.
When a 3 V reference is selected, the ranges are ±12 V, ±6 V,
±3 V, and 0 V to +12 V. For these ranges, the V
must be equal to or greater than the maximum analog input
range selected, see Table 6.
V
The AD7324 has a V
the serial interface operates. V
interface to both 3 V and 5 V processors. For example, if the
AD7324 is operated with a V
powered from a 3 V supply. This allows the AD7324 to accept
large bipolar input signals with low voltage digital processing.
DRIVE
DRIVE
feature to control the voltage at which
CC
DRIVE
of 5 V, the V
allows the ADC to easily
DRIVE
DD
pin can be
and V
AD7324
SS
supply