SC16C650AIB48,157 NXP Semiconductors, SC16C650AIB48,157 Datasheet - Page 21

• Manufacturer Part Number: SC16C650AIB48,157
• Description: IC UART SOT313-2
• Manufacturer: NXP Semiconductors

Specifications of SC16C650AIB48,157

• Features: False-start Bit Detection
• Number Of Channels: 1, UART
• Fifo's: 32 Byte
• Voltage - Supply: 2.5V, 3.3V, 5V
• With Auto Flow Control: Yes
• With Irda Encoder/decoder: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Package / Case: 48-LQFP
• Transmitter And Receiver Fifo Counter: Yes
• Package Type: LQFP
• Operating Supply Voltage (max): 5.5V
• Mounting: Surface Mount
• Pin Count: 48
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935270030157; SC16C650AIB48; SC16C650AIB48

Philips Semiconductors
9397 750 11622
Product data
Table 10:
Table 11:
Table 12:
Bit
2
1
0
FCR[7]
0
0
1
1
FCR[5]
0
0
1
1
Symbol
FCR[2]
FCR[1]
FCR[0]
FIFO Control Register bits description
RCVR trigger levels
TX FIFO trigger levels
FCR[6]
0
1
0
1
FCR[4]
0
1
0
1
Rev. 04 — 20 June 2003
Description
Transmit operation in mode ‘1’: When the SC16C650A is in FIFO
mode (FCR[0] = logic 1; FCR[3] = logic 1), the TXRDY pin will be a
logic 1 when the transmit FIFO is completely full. It will be a logic 0 when
the trigger level has been reached.
Receive operation in mode ‘1’: When the SC16C650A is in FIFO
mode (FCR[0] = logic 1; FCR[3] = logic 1) and the trigger level has been
reached, or a Receive Time-Out has occurred, the RXRDY pin will go to
a logic 0. Once activated, it will go to a logic 1 after there are no more
characters in the FIFO.
XMIT FIFO reset.
RCVR FIFO reset.
FIFO enable.
Logic 0 = No FIFO transmit reset (normal default condition).
Logic 1 = Clears the contents of the transmit FIFO and resets the
FIFO counter logic (the transmit shift register is not cleared or
altered). This bit will return to a logic 0 after clearing the FIFO.
Logic 0 = No FIFO receive reset (normal default condition).
Logic 1 = Clears the contents of the receive FIFO and resets the FIFO
counter logic (the receive shift register is not cleared or altered). This
bit will return to a logic 0 after clearing the FIFO.
Logic 0 = Disable the transmit and receive FIFO (normal default
condition).
Logic 1 = Enable the transmit and receive FIFO. This bit must be a
‘1’ when other FCR bits are written to, or they will not be
programmed.
RX FIFO trigger level (bytes)
8
16
24
28
TX FIFO trigger level (bytes)
16
8
24
30
UART with 32-byte FIFO and IrDA encoder/decoder
…continued
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
SC16C650A
21 of 50