SC16C650BIB48,157 NXP Semiconductors, SC16C650BIB48,157 Datasheet - Page 43

• Manufacturer Part Number: SC16C650BIB48,157
• Description: IC UART SOT313-2
• Manufacturer: NXP Semiconductors

Specifications of SC16C650BIB48,157

• Number Of Channels: 1, UART
• Fifo's: 32 Byte
• Voltage - Supply: 2.5V, 3.3V, 5V
• With Auto Flow Control: Yes
• With Irda Encoder/decoder: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Package / Case: 48-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935274391157; SC16C650BIB48; SC16C650BIB48

NXP Semiconductors
SC16C650B_4
Product data sheet
12.4 Reflow soldering
Key characteristics in reflow soldering are:
Table 29.
Table 30.
Moisture sensitivity precautions, as indicated on the packing, must be respected at all
times.
Studies have shown that small packages reach higher temperatures during reflow
soldering, see
Package thickness (mm)
< 2.5
Package thickness (mm)
< 1.6
1.6 to 2.5
> 2.5
•
•
•
2.5
Lead-free versus SnPb soldering; note that a lead-free reflow process usually leads to
higher minimum peak temperatures (see
reducing the process window
Solder paste printing issues including smearing, release, and adjusting the process
window for a mix of large and small components on one board
Reflow temperature profile; this profile includes preheat, reflow (in which the board is
heated to the peak temperature) and cooling down. It is imperative that the peak
temperature is high enough for the solder to make reliable solder joints (a solder paste
characteristic). In addition, the peak temperature must be low enough that the
packages and/or boards are not damaged. The peak temperature of the package
depends on package thickness and volume and is classified in accordance with
Table 29
SnPb eutectic process (from J-STD-020C)
Lead-free process (from J-STD-020C)
and
Figure
30
Rev. 04 — 14 September 2009
25.
Package reflow temperature ( C)
Volume (mm
< 350
235
220
Package reflow temperature ( C)
Volume (mm
< 350
260
260
250
UART with 32-byte FIFOs and IrDA encoder/decoder
3
3
)
)
Figure
350 to 2000
260
250
245
25) than a SnPb process, thus
220
220
350
SC16C650B
> 2000
260
245
245
© NXP B.V. 2009. All rights reserved.
43 of 48