SC16C852LIB,151 NXP Semiconductors, SC16C852LIB,151 Datasheet - Page 37

• Manufacturer Part Number: SC16C852LIB,151
• Description: IC UART DUAL W/FIFO 48-LQFP
• Manufacturer: NXP Semiconductors

Specifications of SC16C852LIB,151

• Package / Case: 48-LQFP
• Features: Programmable
• Number Of Channels: 2, DUART
• Fifo's: 128 Byte
• Protocol: RS485
• Voltage - Supply: 1.8V
• With Auto Flow Control: Yes
• With Irda Encoder/decoder: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Data Rate: 5 Mbps
• Supply Voltage (max): 2.5 V
• Supply Voltage (min): 1.8 V
• Supply Current: 2 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 568-4208; 935283098151; SC16C852LIB-S

NXP Semiconductors
SC16C852L
Product data sheet
7.15 Transmit Interrupt Level register (TXINTLVL)
7.16 Receive Interrupt Level register (RXINTLVL)
Table 26.
[1]
This 8-bit register is used to store the transmit FIFO trigger levels used for DMA and
interrupt generation. Trigger levels from 1 to 128 can be programmed with a granularity
of 1.
Table 27.
[1]
This 8-bit register is used to store the receive FIFO trigger levels used for DMA and
interrupt generation. Trigger levels from 1 to 128 can be programmed with a granularity
of 1.
Table 28.
Cont-3
0
1
0
1
X
X
X
1
0
1
Bit
7:0
Bit
7:0
When using a software flow control the Xon/Xoff characters cannot be used for data transfer.
For 32-byte FIFO mode, refer to
Table 27
Table 28
Symbol
TXINTLVL[7:0]
Symbol
RXINTLVL[7:0]
Cont-2
0
0
1
1
X
X
X
0
1
1
Software flow control functions
TXINTLVL register bits description
RXINTLVL register bits description
shows TXINTLVL register bit settings.
shows RXINTLVL register bit settings.
All information provided in this document is subject to legal disclaimers.
Cont-1
X
X
X
X
0
1
0
1
1
1
1.8 V dual UART with 128-byte FIFOs and IrDA encoder/decoder
Rev. 4 — 1 February 2011
Description
This register stores the programmable transmit interrupt trigger levels
for 128-byte FIFO mode
Description
This register stores the programmable receive interrupt trigger levels
for 128-byte FIFO mode
0x00 = trigger level is set to 1
0x01 = trigger level is set to 1
...
0x80 = trigger level is set to 128
0x00 = trigger level is set to 1
0x01 = trigger level is set to 1
...
0x80 = trigger level is set to 128
Cont-0
X
X
X
X
0
0
1
1
1
1
Section
7.3.
TX, RX software flow controls
No transmit flow control
Transmit Xon1/Xoff1
Transmit Xon2/Xoff2
Transmit Xon1 and Xon2/Xoff1 and Xoff2
No receive flow control
Receiver compares Xon1/Xoff1
Receiver compares Xon2/Xoff2
Transmit Xon1/Xoff1
Receiver compares Xon1 or Xon2, Xoff1 or Xoff2
Transmit Xon2/Xoff2
Receiver compares Xon1 or Xon2, Xoff1 or Xoff2
Transmit Xon1 and Xon2, Xoff1 and Xoff2
Receiver compares Xon1 and Xon2, Xoff1 and Xoff2
[1]
[1]
[1]
.
.
SC16C852L
© NXP B.V. 2011. All rights reserved.
37 of 64