SC16C750BIA44,518 NXP Semiconductors, SC16C750BIA44,518 Datasheet - Page 19

• Manufacturer Part Number: SC16C750BIA44,518
• Description: IC UART SINGLE W/FIFO 44-PLCC
• Manufacturer: NXP Semiconductors
• Type: UART with 64-byte FIFOsr

Specifications of SC16C750BIA44,518

• Number Of Channels: 1, UART
• Package / Case: 44-LCC (J-Lead)
• Fifo's: 64 Byte
• Voltage - Supply: 2.5V, 3.3V, 5V
• With Auto Flow Control: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Data Rate: 3 Mbps
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.25 V
• Supply Current: 4.5 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Supply Voltage: 2.5 V or 3.3 V or 5 V
• Transmit Fifo: 64Byte
• Receive Fifo: 64Byte
• Transmitter And Receiver Fifo Counter: Yes
• Package Type: PLCC
• Operating Supply Voltage (max): 5.5V
• Mounting: Surface Mount
• Pin Count: 44
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 568-2049-2; 935274402518; SC16C750BIA44-T

NXP Semiconductors
SC16C750B_5
Product data sheet
Table 10.
Table 11.
Bit
2
1
0
FCR[7]
0
0
1
1
Symbol
FCR[3]
(continued)
FCR[2]
FCR[1]
FCR[0]
FIFO Control Register bits description
RCVR trigger levels
FCR[6]
0
1
0
1
Description
Transmit operation in mode ‘1’: When the SC16C750B is in FIFO mode
(FCR[0] = logic 1; FCR[3] = logic 1), the TXRDY pin will be a logic 1 when
the transmit FIFO is completely full. It will be a logic 0 when the FIFO is
emptied.
Receive operation in mode ‘1’: When the SC16C750B is in FIFO mode
(FCR[0] = logic 1; FCR[3] = logic 1) and the trigger level has been reached,
or a Receive Time-Out has occurred, the RXRDY pin will go to a logic 0.
Once activated, it will go to a logic 1 after there are no more characters in
the FIFO.
XMIT FIFO reset.
RCVR FIFO reset.
FIFO enable.
Rev. 05 — 17 October 2008
logic 0 = no FIFO transmit reset (normal default condition)
logic 1 = clears the contents of the transmit FIFO and resets the FIFO
counter logic (the transmit shift register is not cleared or altered). This bit
will return to a logic 0 after clearing the FIFO.
logic 0 = no FIFO receive reset (normal default condition)
logic 1 = clears the contents of the receive FIFO and resets the FIFO
counter logic (the receive shift register is not cleared or altered). This bit
will return to a logic 0 after clearing the FIFO.
logic 0 = disable the transmit and receive FIFO (normal default condition)
logic 1 = enable the transmit and receive FIFO
RX FIFO trigger level (bytes)
16-byte operation
1
4
8
14
5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs
…continued
64-byte operation
1
16
32
56
SC16C750B
© NXP B.V. 2008. All rights reserved.
19 of 44