V23826-H18-C363 Infineon Technologies, V23826-H18-C363 Datasheet - Page 7

• Manufacturer Part Number: V23826-H18-C363
• Description: TXRX SINGLE MODE 622MBD 1X9
• Manufacturer: Infineon Technologies
• Series: -r

Specifications of V23826-H18-C363

• Data Rate: 622Mbps
• Wavelength: 1300nm
• Applications: Ethernet
• Voltage - Supply: 3.1 V ~ 3.5 V
• Connector Type: SC
• Mounting Type: PCB
• Lead Free Status / Rohs Status: Contains lead / RoHS non-compliant
• Other names: V23826-H18-C363IN

SHIELD OPTION
Shield with backward springs, -D3
Published by Infineon Technologies AG
©
All Rights Reserved
Attention please!
The information herein is given to describe certain components and shall not be
considered as warranted characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties
of non-infringement, regarding circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices
please contact the Infineon Technologies offices or our Infineon Technologies
Representatives worldwide - see our webpage at
www.infineon.com/fiberoptics
Infineon Technologies AG • Fiber Optics • Wernerwerkdamm 16 • Berlin D-13623, Germany
Infineon Technologies, Inc. • Fiber Optics • 1730 North First Street • San Jose, CA 95112, USA
Infineon Technologies K.K. • Fiber Optics • Takanawa Park Tower • 20-14, Higashi-Gotanda, 3-chome, Shinagawa-ku • Tokyo 141, Japan
Infineon Technologies AG 2001
Dimensions in mm [inches]
Warnings
Due to technical requirements components may contain dangerous substances.
For information on the types in question please contact your Infineon Technologies
offices.
Infineon Technologies Components may only be used in life-support devices or
systems with the express written approval of Infineon Technologies, if a failure of
such components can reasonably be expected to cause the failure of that
life-support device or system, or to affect the safety or effectiveness of that device
or system. Life support devices or systems are intended to be implanted in the
human body, or to support and/or maintain and sustain and/or protect human life.
If they fail, it is reasonable to assume that the health of the user or other persons
may be endangered.