GP1S58VJ000F Sharp Electronics, GP1S58VJ000F Datasheet - Page 9

• Manufacturer Part Number: GP1S58VJ000F
• Manufacturer: Sharp Electronics
• Type: Transmissiver

Specifications of GP1S58VJ000F

• Number Of Elements: 1
• Output Device: Phototransistor
• Gap Width: 5mm
• Slit Width: 0.5mm
• Reverse Breakdown Voltage: 6V
• Collector-emitter Voltage: 35V
• Forward Current: 50mA
• Collector Current (dc) (max): 20mA
• Power Dissipation: 75mW
• Fall Time: 20000ns
• Rise Time: 15000ns
• Pin Count: 4
• Mounting: Through Hole
• Operating Temp Range: -25C to 85C
• Operating Temperature Classification: Commercial
• Lead Free Status / Rohs Status: Compliant

■ Manufacturing Guidelines
● Soldering Method
Flow Soldering:
Hand soldering
Other notice
Flux
Soldering should be completed below 260˚C and within 5 s.
Please take care not to let any external force exert on lead pins.
Please don't do soldering with preheating, and please don't do soldering by refl ow.
Hand soldering should be completed within 3 s when the point of solder iron is below 350̊C.
Please solder within one time.
Please don't touch the terminals directly by soldering iron.
Soldered product shall treat at normal temperature.
Please test the soldering method in actual condition and make sure the soldering works fine, since the
impact on the junction between the device and PCB varies depending on the cooling and soldering
conditions.
Some fl ux, which is used in soldering, may crack the package due to synergistic effect of alcohol in fl ux and
the rise in temperature by heat in soldering. Therefore, in using fl ux, please make sure that it does not have
any infl uence on appearance and reliability of the photointerrupter.
9
Sheet No.: D2-A02702EN
GP1S58VJ000F