RC1005J220CS Samsung Semiconductor, RC1005J220CS Datasheet - Page 17

• Manufacturer Part Number: RC1005J220CS
• Manufacturer: Samsung Semiconductor
• Type: Thick Filmr

Specifications of RC1005J220CS

• Power Rating(s): 1/16W
• Resistance: 22ohm
• Tolerance (+ Or -): 5%
• Temperature Coefficient: ±100
• Package / Case: 0402
• Operating Temp Range: -55C to 125C
• Case Style: Molded
• Failure Rate: Not Required
• Product Length (mm): 1mm
• Product Depth (mm): 0.5mm
• Product Height (mm): 0.35mm
• Construction: Rectangular
• Lead Free Status / Rohs Status: Compliant

APPLICATION MANUAL
● STORAGE
● APPLICATIONS
Chip resistors are designed for general electronic devices such as home appliances, computer,
To maintain proper quality of chip components, the following precautions are required for
storage environment, method and period.
mobile communications, digital circuit, etc.
If you require our products with high reliability-performing at more than 125C or below -55C
for medical equipments, aircraft, high speed machines, military usage, and items that can
affect human life or if you need to use in specific conditions (corrosive gas atmosphere),
please contact us beforehand.
▶ Storage Environment
▶ Storage Time Period
▶ Normal Operation temperature ranges(℃) as follows.
▶ Although resistor body is coated, sharp excessive impact should be avoided to prevent
- Chip components may be deformed, if the temperature of packaged components exceeds
- Do not store where the soldering properties can be deteriorated by harmful gas such as
- Bulk packed chip components should be used as soon as the seal is opened, thus
- The remaining unused chips should be put in the original bag and sealed again or store in
- Stored chip components should be used within 6 months after receiving the components.
- 1608, 2012, 3216(general, precision) : -55℃ ~ + 155℃
- Others (rectangular, array, trimmable) : -55℃ ~ + 125℃
damages and adverse effects on characteristics(resistor value, open circuited, T.C.R.).
40℃.
sulphurous gas, chlorine gas, etc.
preventing the solderability from deteriorating.
a desiccator containing a desiccating agent.
If 6 months or more have elapsed, please check the solderability before actually using.