NTN8655A MOTOROLA TWO WAY, NTN8655A Datasheet - Page 68

• Manufacturer Part Number: NTN8655A
• Description: 14C7391
• Manufacturer: MOTOROLA TWO WAY

DESKTOP CHARGER
The NTN8653A Desktop Rapid Charger will charge Motorola
authorized batteries listed on page 59 for the i1000. To charge a
Charging a Battery
battery, refer to Figure 3 and follow the procedure below:
LED
Indicators
1. Plug the flat end of the power-supply cord into the receptacle on
5. The charger has the capability of displaying the battery’s charge
2. Plug the transformer end of the power-supply cord into any
3. Insert an i1000 portable with an attached battery, into the
4. If the portable is properly seated in the front pocket, the
i1000
Front Pocket
Pin Connector
the back of the charger.
standard AC wall outlet. The charger performs a quick power-
up self-test, during which the LED indicators will flash once to
indicate a successful power-up.
charger's front pocket. This is done by inserting the bottom of
i1000 portable onto the pin connector in the bottom of the
charger's front pocket.
charger’s front pocket LED indicator will light red to indicate
that the battery is being charged. (If a battery is in the rear
pocket and the portable with a battery is inserted into the front
pocket, the rear pocket’s LED flashes yellow, indicating that its
battery is waiting to be charged.)
status. The indicator will show the following: solid red=1-30%;
solid yellow=31-60%; flashing green=61-90%; solid green=91-
100%.
Figure 3: Desktop Rapid Charger
Rear Pocket
Power supply cord receptacle
GETTING STARTED
63