M29W320ET70ZE6E Micron Technology Inc, M29W320ET70ZE6E Datasheet - Page 18

• Manufacturer Part Number: M29W320ET70ZE6E
• Manufacturer: Micron Technology Inc

Specifications of M29W320ET70ZE6E

• Cell Type: NOR
• Density: 32Mb
• Access Time (max): 70ns
• Interface Type: Parallel
• Boot Type: Top
• Address Bus: 22/21Bit
• Operating Supply Voltage (typ): 3/3.3V
• Operating Temp Range: -40C to 85C
• Package Type: TFBGA
• Sync/async: Asynchronous
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Word Size: 8/16Bit
• Number Of Words: 4M/2M
• Supply Current: 10mA
• Mounting: Surface Mount
• Pin Count: 48
• Lead Free Status / Rohs Status: Compliant

3.5
3.6
3.6.1
3.6.2
18/65
Automatic Standby
If CMOS levels (V
more the memory enters Automatic Standby where the internal Supply current is reduced to
the Standby Supply current, I
operation is in progress.
Special bus operations
Additional bus operations can be performed to read the Electronic signature and also to
apply and remove Block Protection. These bus operations are intended for use by
programming equipment and are not usually used in applications. They require V
applied to some pins.
Electronic signature
The memory has two codes, the manufacturer code and the device code, that can be read
to identify the memory. These codes can be read by applying the signals listed in
and
Block Protect and Chip Unprotect
Groups of blocks can be protected against accidental Program or Erase. The Protection
groups are shown in
Addresses. The whole chip can be unprotected to allow the data inside the blocks to be
changed.
The V
V
protected regardless of the Block Protection Status or the Reset/Block Temporary
Unprotect pin status.
Block Protect and Chip Unprotect operations are described in
PP
/Write Protect is at V
Table
PP
/Write Protect pin can be used to protect the two outermost boot blocks. When
3, Bus operations.
CC
Appendix A: Block
± 0.2V) are used to drive the bus and the bus is inactive for 300ns or
IL
the two outermost boot blocks are protected and remain
CC2
. The Data Inputs/Outputs will still output data if a Bus Read
Addresses,
Table 21
and
Appendix D: Block
Table
22, Block
Protection.
ID
Table 2
to be