YCUT129ACSR FCI, YCUT129ACSR Datasheet - Page 58

• Manufacturer Part Number: YCUT129ACSR
• Manufacturer: FCI

Specifications of YCUT129ACSR

• Lead Free Status / Rohs Status: Supplier Unconfirmed

N-58
TYPES EPAC10,
EPAC8, AND EPAC6
EPAC SERIES ELECTRIC/
HYDRAULIC PUMP,
AIR CONTROL
HYDRAULIC OUTPUT
PRESSURES OF: 10,000 PSI,
8,800 PSI, AND 6,000 PSI
The EPAC10, EPAC8, and EPAC6 electrically
driven hydraulic pumps feature exclusive
automatic or manual “jog and hold” operation
control provided by a unique air control
switch, which provides the safest operation
method of any pump available. All EPAC’s are
remotely controlled by an improved air control
switch which electrically isolates the operator
from the unit, and can be operated by either
hand or foot activation. A three (3) position
toggle switch mounted on the control box
allows the operator to select either full
automatic, off, or manual operation.
The automatic mode advances the remote
tool into a “hold” position without crimping the
connector so the operator can inspect the
orientation before completing the crimp. Once
the crimp is completed, the pump auto-
matically turns the pump off, allowing the
retraction of the remote tool and resets itself
for the next operation.
The manual position allows the operator to
jog the tool forward without the tool ram
retracting. To retract the tool prior to complet-
ing the crimp, turn the control switch to “off,”
the pump will stop and the tool will retract. In
the manual mode the pump advances only
while the control is being depressed. To
complete a crimp, squeeze and hold the air
control switch until the pump reaches the pre-
set pressure and shuts off.
The EPAC Series of electrically driven
hydraulic pumps incorporate a heavy-duty roll
cage design that is both rugged and portable.
All EPAC Series pumps have been life cycle
tested to over 100,000 cycles without failure,
and are warranted to be free of defects in
material and workmanship for five (5) years
when properly maintained and operated.
BURNDY
Tooling
FEATURES
• Roll cage
• 3 position switch and control box
• Factory set output pressure
• Quick disconnect hydraulic coupler
• Oil level window
• 8 quart reservoir
BENEFITS
• Permits final inspection of connector
• Extra supply hydraulic fluid 8-quart
• Full automatic or manual “Jog and
• Operator safety with power loss “smart
• Method of operation desired is permitted
• Safety is provided against hazardous
• Saves time with quick disconnect
• Windows allows easy inspection of
• High quality crimps are achieved with built-
• 5-year limited warranty.
before completing crimp cycle.
reservoir.
Hold” cycles.
circuit,” freezes unit in event of power
disruption.
with 3-position selection switch.
shock with airbulb actuator and air line.
hydraulic fitting.
proper oil level.
in factory set pressure release valve.
®
Products
SPECIFICATIONS
FOR USE ON
EPAC10
EPAC10-2
EPAC-8
EPAC-6
(EPAC**-2 versions): 1/2 HP 220/230 V-AC,
Reservoir volume: 8 quarts max,
Maximum current
Dry weight: 68 lbs
(1/2 HP @ 3450 RPM)
10,000 Y34BH, Y35BH,
8,800
6,000
Height: 17-1/2
Motor: 1/2 HP 115/230 V-AC,
Base: 11-3/4
draw: 10 amperes
Y35BH-4,Y39BH,
Y45,Y46,Y46-C,
Y60BHU, Y750BH,
Y750BH-2, Y644MBH,
RHCC Series Cutters
Y48BH
Y35L, RHCC Series
Cutters
60 Cycle
50 Cycle
2 quarts min
(82 lbs w/max fluid)
18-1/2