YCUT129ACSR FCI, YCUT129ACSR Datasheet - Page 37

• Manufacturer Part Number: YCUT129ACSR
• Manufacturer: FCI

Specifications of YCUT129ACSR

• Lead Free Status / Rohs Status: Supplier Unconfirmed

TYPE Y700DC-1B
Y-DC BATTERY POWERED
HYDRAULIC PUMP
HYDRAULIC OUTPUT
PRESSURE OF:
10,000 PSI
The lightweight, portable, battery powered
hydraulic pump unit for use with almost all
BURNDY
and cutters. The pump will provide approxi-
mately 30 operations before requiring a
recharge of the batteries, which can be
recharged in under 15 minutes, utilizing the
rapid charger provided. The high capacity 12
VDC batteries and charging system will allow
1,000 charge/discharge cycles per battery
providing more than double the life of other
batteries. The pump is supplied with a dielec-
tric grade 6’ long hydraulic hose, 1 rapid bat-
tery charger, and 2 rechargeable batteries.
Also included is an air-bulb control switch that
allows remote operation of the pump, or users
may opt for the built-in switch to operate the
unit. The Y700DC-1B provides consistent,
reliable compression connections due to the
factory-set “pop-off” pressure relief valve. The
full automatic operation allows the operator to
control functions such as “Advance”, “Hold”,
and “Retract” at will, truly making the
Y700DC-1B a versatile, go-anywhere pump
unit.
SINGLE OR DUAL
BATTERY OPERABLE
®
HYPRESS™ remote tool heads
CARRY STRAP
BURNDY
Tooling
Features
FEATURES
• Lightweight, easy to carry.
• Two modes of operation.
• Transparent reservoir.
• Charged/Low battery indicator.
• Rapid battery recharger
• Allows use of wide range of remote
• 5-year limited warranty on tool and 1-year
BENEFITS
• Lightweight and easy to lift, carry, and
• Advance and hold feature permits final
• Transparent reservoir allows viewing for
(less than 15 mins.).
tool heads and cutters.
on batteries and chargers.
transport to/around job site.
inspection before completing crimp cycle.
daily checking of fluid level.
PUSH BUTTON CONTROL SWITCH
BATTERY STATUS INDICATOR
ON/OFF CONTROL SWITCH
AIR BULB CONTROL
®
Products
SPECIFICATIONS
FOR USE ON
Battery
Pump
Y700DC-1B 10,000
ACCESSORIES
• Steel Carry Case: Cat# YDC-CASE
• Batteries: Cat#
• Charger:
BENEFITS
• Choice of operation method with either
• Unit allows operation with only 1 battery
• Built-in device prevents operation when
• Able to operate in remote locations without
Holds pump (w/2 batteries), Charger,
6 Hose, and air-bulb control
mounted switch or remote air-bulb
control devices.
while the other recharging the other.
batteries have insufficient power to com-
plete crimping cycle.
electric power source.
COMPLETE UNIT
Hydraulic Fluid: BURNDY
Power Source: 12V-DC batteries (2)
Operating PSI: Low-0.98 Mpa
DIMENSIONS
Control Type: Air-bulb or switch
Max Output: 280 watt
Max Draw: 35 amp
Psi
MOTOR
Weight: 15-1/2 lbs. with fluid
Height: 11.5
Cat#
PUMP
Depth: 6.5
Width: 8.25
Type: Electric (12V-DC)
(Continued)
BAT12B
BATCHGR
Tools and Cutters
Y34BH, Y35BH, Y35BH-4,
Y39BH, Y75OBH, Y75OBH-2,
Y644MBH, Y45, Y45-1, Y46,
Y46-C, RHCC Series Cutters
High -68.6 + 3.4 Mpa
and two batteries
®
ALFLUID™
N-37