ZMOT0BSB1A0AG Zilog, ZMOT0BSB1A0AG Datasheet - Page 50

• Manufacturer Part Number: ZMOT0BSB1A0AG
• Description: Processors - Application Specialized ZMB Nic RE200B-P Pyr Nic. NCL-9(26) Lens
• Manufacturer: Zilog

Specifications of ZMOT0BSB1A0AG

• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Package / Case: SOIC-8
• Core: Z8FS040
• Number Of Timers: 2
• Processor Series: ZMOTION
• Program Memory Size: 4 KB
• Program Memory Type: Flash
• Lead Free Status / Rohs Status: Details

Appendix A. Application Schematics
PS028511-0112
8-Pin Z8FS040xSB20EG MCU
The ZMOTION Detection and Control MCU is available in 8-pin, 20-pin and 28-pin parts
and configurable with dual and quad pyro sensor and lens combinations.
Figure 10 shows an example circuit for part number Z8FS040xSB20EG, an 8-pin ZMO-
TION Detection and Control MCU. The interface to the pyroelectric sensor is via the ded-
icated input ANA2 (pin 5). The status LED is driven by pin 6 which is normally
configured as a GPIO by the application to control the state of the LED. Pin 2 is used as
the debug input to the chip, but can be used for other functions as required. Pin 4 is set up
for the Reset function, but may also be used for other functions as the application requires.
Pull-up resistors (10K) are provided on the Debug and Reset signals as required for the
Debug interface. The signals on pins 3 and 7 can be used as required. The power supply
design is left to the application requirements.
In DUAL PYRO Mode, the second Pyroelectric sensor is connected to Pin 3 (ANA3). All
other connections remain the same.
ZMOTION™ Detection and Control Family
Product Specification
Application Schematics
43