MT9234ZPX-UPCI-CP Multi-Tech Systems, MT9234ZPX-UPCI-CP Datasheet - Page 56

• Manufacturer Part Number: MT9234ZPX-UPCI-CP
• Description: MODEM V.92 DATA/FAX/VOICE WORLD
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® ZPXr

Specifications of MT9234ZPX-UPCI-CP

• Data Format: V.92
• Baud Rates: -
• Interface: Parallel
• Voltage - Supply: 3.3V, 5V
• Mounting Type: Socket
• Package / Case: 6.0" L x 4.8" W x 0.7" H (152mm x 122mm x 18mm)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Appendix C – Upgrading Your Modem
Introduction
Upgrade Overview
Step 1: Identify the Modem Firmware
You must know the model number and firmware version of your Multi-Tech modem to know whether or not you
should upgrade it.
Step 2: Identify the Current Firmware Version
Identify the current version of your modem’s firmware at the Multi-Tech Web site. If your modem already has the
current firmware, there is no need to upgrade it.
56
Your modem is controlled by semi-permanent software, called firmware, which is stored in flash memory.
Firmware is nonvolatile; that is, it remains stored in memory when the modem is turned off. However, it can be
changed by either the manufacturer or the user as bugs are fixed or new features are added. Since the
firmware in your modem is stored in flash memory, you can upgrade it yourself in a few minutes by using the
following procedures.
The upgrade procedure consists of the following steps, which are described in greater detail in the following
1. Identify the model number and firmware version of your modem.
2. Identify the current version of the firmware at the Multi-Tech Web site. If your modem already has the
3. Download the upgrade file and the appropriate Flash Wizard for your modem.
4. Install the Flash Wizard and extract the firmware .HEX file from the file you downloaded.
5. Document and clear your stored parameters.
6. Upgrade the modem’s firmware using the .HEX file and the Flash Wizard.
7. Restore your parameters.
1. Run your favorite terminal program. If available, you can use HyperTerminal.
2. In the program’s terminal window, type AT&F. Even if you cannot see the AT&F command on your screen,
3. Now type ATI, press E
1. Using your favorite Web browser, go to
2. Product Firmware – Select the product family to view firmware for product in that product line. Click on the
3. Look at the firmware version number for your modem.
4. If the firmware version number matches the firmware version number found in “Step 1: Identify the Modem
5. If the firmware version number is greater than the firmware version number found in “Step 1: Identify the
sections.
current firmware, there is no need to upgrade it.
be sure to type it completely, and then press E
AT&F command.
appear similar to that shown below. In the example below, the firmware version is 1.02d.
Agere OCM v.92 MT9234ZPX-UPCI Internal Data/Fax Modem version 1.02d.
down arrow and scrol down to Multimodem ZPX.
Firmware,” your modem has the current firmware version, and does not need to be upgrade.
Modem Firmware,” your modem has an older firmware version. Continue with “Step 3: Download the
Upgrade File.”
Warning: The first digit of the new firmware must match the first digit of the old firmware, or the modem
may not work properly (e.g., if your current firmware version is 4.16, replace it only with 4.xx firmware,
not 6.xx firmware).
Appendix C – Upgrading Your Modem
NTER
, and record your results. The model number and firmware version should
http://www.multitech.com/en_US/SUPPORT/Updates/Firmware
NTER
. If the modem does not respond with OK, repeat the
Multi-Tech Systems, Inc. MT9234ZPX User Guide