MT9234ZPX-UPCI-CP Multi-Tech Systems, MT9234ZPX-UPCI-CP Datasheet - Page 24

• Manufacturer Part Number: MT9234ZPX-UPCI-CP
• Description: MODEM V.92 DATA/FAX/VOICE WORLD
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® ZPXr

Specifications of MT9234ZPX-UPCI-CP

• Data Format: V.92
• Baud Rates: -
• Interface: Parallel
• Voltage - Supply: 3.3V, 5V
• Mounting Type: Socket
• Package / Case: 6.0" L x 4.8" W x 0.7" H (152mm x 122mm x 18mm)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

+DR
Description:
Syntax:
Values:
Default:
Reporting:
Result Codes:
+DS
Description:
Syntax:
<direction> Values:
<compr_neg> Values: Specifies whether or not the modem should continue to operate if the desired
<max_dict> Values:
<max_string> Values:
Reporting:
Result Codes:
Multi-Tech Systems, Inc. AT Commands for the MultiModem & SocketModem MT9234 Series (S000434H)
V.44 Data Compression Reporting
Enables or disables the V.44 data compression report. If the compression report is
enabled, the +DR:<type> intermediate result code reports the current DCE-DCE data
compression type. It is issued after the Error Control Report (+ER) and before the
final result code (e.g., CONNECT).
AT+DR=<value>
0
1
0
+DR?
+DR=?
OK if <value> = 0, 1.
ERROR if <value> ≠ 0, 1.
+DR: NONE Data compression not in use.
+DR: V42B
+DR: V44
V.42bis Data Compression
This extended-format compound parameter controls the V.42bis data compression
function if this function is provided in the modem.
AT+DS=<direction>,<compr_neg>,<max_dict>,<max_string>
Specifies the desired direction(s) of operation of the data compression function
from the DTE point of view.
0
3
result is not obtained.
0
Specifies maximum number of dictionary entries (2048 entries) negotiated. May
be used by the DTE to limit the code word size transmitted, based on its
knowledge of the nature of the data to be transmitted. Default = 2048.
Specifies maximum string length (32 bytes) to be negotiated. Default = 32.
+DS?
+DS=?
OK
ERROR
Disables the V.44 compression report.
Enables the V.44 compression report.
Reports current or selected values.
Reports supported parameter values.
V.42bis is in use in both directions.
V.44 is in use in both directions.
Do not negotiate V.42 bis compression.
Modem accepts V.42 bis compression in both directions. Default.
Do not disconnect if V.42bis is not negotiated by the remote modem as
specified in <direction>. Default.
Reports current or selected values.
Reports allowed parameter values.
Chapter 1 – AT Commands, S-Registers, and Result Codes
24