DHR 100 C10 LEM USA Inc, DHR 100 C10 Datasheet - Page 4

• Manufacturer Part Number: DHR 100 C10
• Description: SENSOR CURRENT 100A 50V MOD
• Manufacturer: LEM USA Inc
• Series: DHRr

Specifications of DHR 100 C10

• Current - Sensing: 100A
• Accuracy: ±1%
• Sensitivity: -
• Current - Supply: 30mA
• Sensor Type: Open Loop
• Voltage - Supply: 20 V ~ 50 V
• Output: 0 ~ 10 V
• Frequency: 20Hz ~ 6kHz
• Polarization: Bidirectional
• Operating Temperature: -40°C ~ 70°C
• Package / Case: Module
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 398-1086

Dimensions DHR-C10
100518/19
Dimensions DHR-C5
080725/15
Dimensions DHR-C5
080725/15
Ip
Ip
Ip
Ip
24 VDC Power
24 VDC Power
(+)
(-)
(+)
(-)
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice.
(Controller, meter etc)
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice.
(Controller, meter etc)
(-)
1(Vcc) 2(NC) 3(Vout) 4(GND)
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice.
(-)
1(Vcc) 2(NC) 3(Vout) 4(GND)
Load
(in mm. 1 mm = 0.0394 inch)
Output Connector
6
Load
10k
(in mm. 1 mm = 0.0394 inch)
Output Connector
6
10k
(in mm. 1 mm = 0.0394 inch)
DHR
(+)
DHR
(+)
22.28
22.28
90
Is
Is
70
60
78
90
+24VDC
+24VDC
Is
Is
70
60
78
OUT
OUT
GND
GND
+24VDC
+24VDC
OUT
OUT
GND
GND
6.80
6.80
Connections
• Wires up to ∅ 2 mm
• Female connector provided (spring terminal blocks)
• User-friendly spring-cage connection for no-tool direct conductor
Mechanical characteristics
• General tolerance
• Primary aperture
• Panel mounting
• Distance between holes
For panel mounting, replace M4 screws by new one (not supplied)
with appropriate length to panel´s thickness.
Remarks
• The temperature of the primary busbar can not exceed 90 °C.
• Dynamic performances are the best with a primary busbar
• This is a standard model. For different versions (supply voltages,
connection
completely filling the primary aperture.
different outputs, bidirectional measurements...), please
contact us.
Connections
• Wires up to ∅ 2 mm
• Female connector provided (spring terminal blocks)
• User-friendly spring-cage connection for no-tool direct conductor
Mechanical characteristics
• General tolerance
• Primary aperture
• Panel mounting
• Distance between holes
For panel mounting, replace M4 screws by new one (not supplied)
with appropriate length to panel´s thickness.
Remarks
• The temperature of the primary busbar can not exceed 90 °C.
• Dynamic performances are the best with a primary busbar
• This is a standard model. For different versions (supply voltages,
7
connection
completely filling the primary aperture.
different outputs, bidirectional measurements...), please
contact us.
Connections
●
●
●
Mechanical characteristics
●
●
●
●
Remarks
●
●
●
7
Wires up to Ø 2 mm
Female connector provided (spring terminal blocks)
User-friendly spring-cage connection for no-tool direct
conductor connection
General tolerance
Primary aperture
Panel mounting
Distance between holes
(see above dimensions)
For panel mounting, use M4 screws (not supplied) with
appropriate length to panel´s thickness, and tighten to
0.75Nm +/-20% torque.
The temperature of the primary busbar can not exceed
90 °C.
Dynamic performances are the best with a primary
busbar completely filling the primary aperture.
This is a standard model. For different versions
(supply voltages, different outputs, bidirectional
measurements...), please contact us.
25
• • •• • • • •••••••••••
• • •• • • • • • • • • • • • •
•• • ••• •• •••••••••
25
• • •• • • • •••••••••••
• • •• • • • • • • • • • • • •
•• • ••• •• •••••••••
±1 mm
∅ 32.0 mm
4 holes ∅ 4.6 mm
70.0 mm & 78 mm
(see above dimensions)
15
4
±1 mm
∅ 32.0 mm
4 holes ∅ 4.6 mm
70.0 mm & 78 mm
(see above dimensions)
15
4
±1 mm
Ø 32.0 mm
4 holes Ø 4.6 mm
70.0 mm & 78 mm
www.lem.com
www.lem.com
www.lem.com
Page 4/4
Page 4/4
Page 4/4