3342-7 Peregrine Semiconductor, 3342-7 Datasheet - Page 8

• Manufacturer Part Number: 3342-7
• Description: PROGRAMMING BOARD FOR PE3342
• Manufacturer: Peregrine Semiconductor
• Series: -r

Specifications of 3342-7

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 3342-07

10-Wire Interface Cable Configuration
Table 1 shows the 10-wire interface cable configuration.
Table 1. 10-Wire interface cable configuration.
EE Programming Kit Setup
1. As shown in Figure 1, verify a jumper is placed on the connector J4 between VPP
2. Verify a jumper is placed on the connector J2.
3. Verify all switches of SW1 if installed are in “OFF” position.
4. Connect your computer’s printer port to J1 on the programming board via a 10-wire
5. Connect power supply cables to the EEPROM programming board as shown in
Peregrine Semiconductor Corportation
8 Yellow
7 Brown
6 Blue
5 Orange
9 Violet
10 Gray
2 Red
3 White
4 Black
18 Green
Pin No. of DB-25 socket
Pin 2 (VPP, the center pin) and Pin 1 (pin at left).
interface cable.
Figure 1. Verify all supplies are turned off prior to connecting to programming board.
With 2-wire power supply cable, connect the +3 V supply to J3 (J3-1 +3 and J3-3
GND)
With 4-wire power supply cable, connect the +13 V supply to J6-4 (red connector),
the -9 V supply to J6-1 (black connector), and the ground to J6-2 & -3 (green
connector).
1 EE_WRT, yellow
2 E_WR, brown
3 EE_DEL, blue
4 EE_PROG (EELOAD), orange
5 EE_SEL, violet
6 DOUT, gray
7 S_CLK, red
8 S_DATA, white
9 S_WR, black
10 GND, green
Pin No. of 10-Wire connector

8
Doc. 79/0089~00A