3342-7 Peregrine Semiconductor, 3342-7 Datasheet - Page 11

• Manufacturer Part Number: 3342-7
• Description: PROGRAMMING BOARD FOR PE3342
• Manufacturer: Peregrine Semiconductor
• Series: -r

Specifications of 3342-7

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 3342-07

Software Installation Instructions
In order to setup the Programming Software on your computer:
1. Start Microsoft Windows
2. If the software comes with a CD, insert the CD to CDROM drive. Otherwise, insert the
3. Double-click the “setup.exe” file and follow the on-screen instructions to finish
Software Operation Instructions
With the EE Programming kit set up completed as described in the previous section, the
follow steps are for programming of the EEPROM register.
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7: Turn on all power supplies (+3, +12.5 and -9 V) with no part in the IC holder.
Step 8:
Step 9:
Peregrine Semiconductor Corportation
floppy disk 1 to the floppy disk drive. Search the “setup.exe” file.
installation.
Place carefully one PE3341/2 IC in the IC holder.
Click the “SEND DATA” button to send data to the PLL.
Start the “Peregrine EE PLL Control Software” program.
example of the screen.
section.
Enter reference frequency (crystal frequency) value in MHz into the Ref Freq box
(marked by red dot at left)
Set reference counter (R counter) to the desired value by entering it into the R
Register box in the middle left side (marked by yellow dot at left). Note that the
numbers in the orange boxes are computed values and cannot be directly typed
in.
desired value.
Set the VCO frequency to the appropriate value by typing it into the “Out Freq
(MHz)” box. Once the frequency value is entered into the box, the corresponded
M and A register values are displayed in the “M Register” and “A Register”
Boxes, respectively. Instead of entering the frequency value into the “Out Freq
(MHz)” box, the frequency can also be changed by entering M register and A
register values into the “M Register” and “A Register” boxes directly.
Verify “frequency step” (which is also called phase detector frequency) is at the
Verify the “EEPROM Register” is displayed in the drop down menu in the middle
TM
‘95/98/2000.

11
Figure 2 shows one
Doc. 79/0089~00A