X4K-Z1U-00011-A1 Digi International, X4K-Z1U-00011-A1 Datasheet - Page 31

• Manufacturer Part Number: X4K-Z1U-00011-A1
• Description: IDIGI GATEWAY DEV KIT ZIGBEE
• Manufacturer: Digi International
• Series: IDigi®r
• Type: Transceiver, Z-Waver

Specifications of X4K-Z1U-00011-A1

• Frequency: 2.4GHz
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: ConnectPort® X4
• Other names: 602-1209

iDigi Gateway Development Kit Getting Started Guide
13. Now you need to configure the Smart Project Editor with the MAC addresses of the two
XBee devices that were added to this project in Step 7 (above). To do that, simply copy
the XBee Extended Address from the ConnectPort X4's web UI (as shown in Figure 30)
into the appropriate MAC address field within the Smart Project Editor.
Note: For non‐US kits, select the “XBee Wall Router [xbr0]” instead of XBee RPM.
With the MAC addresses updated in the Smart Project Editor, all configuration errors
(missing XBee MAC addresses for your XBee Sensor and XBee Smart Plug) should be
cleared.
a. Copy the Extended Address of your XBee /L/T Sensor from the ConnectPort X4's
b. Then copy the Extended Address of your XBee Smart Plug from the ConnectPort
web UI into the MAC address field of the XBee Sensor device in the Smart
Project Editor.
X4's web UI into the MAC address field of the XBee RPM device in the Smart
Project Editor (as shown below).
Figure 31: Enter MAC Address
31