BLKD815EPFVU Intel, BLKD815EPFVU Datasheet - Page 68

• Manufacturer Part Number: BLKD815EPFVU
• Manufacturer: Intel

Specifications of BLKD815EPFVU

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Intel Desktop Board D815EFV/D815EPFV Technical Product Specification
2.8.2 Internal I/O Connectors
2.8.2.1
✏
68
The internal I/O connectors are divided into the following functional groups:
•
•
The board has the following ATX-compliant expansion slots:
•
•
•
NOTE
This document refers to back-panel slot numbering with respect to processor location on the
board. On the board’s silkscreen, PCI slots are labeled as PCI 1, PCI 2, and PCI 3, starting with
the slot closest to the processor. The CNR slot shares a PCI slot number. The AGP slot is labeled
as “AGP” and is not numbered.
The ATX/microATX specifications identify expansion slot locations with respect to the far edge of a
full-sized ATX chassis. The ATX specification and the board’s silkscreen are opposite and could
cause confusion. The ATX numbering convention is made without respect to slot type (PCI or
AGP), but refers to an actual connector location on a chassis. Figure 15 on page 73 illustrates the
board’s PCI connector numbering.
Audio, video, power, and hardware control (see page 69)
 Front panel audio (optional)
 ATAPI CD-ROM
 Auxiliary line in
 Digital video out (optional; present only on D815EFV boards)
 Fans
 Power
 Chassis intrusion (optional)
 Wake on LAN technology (optional)
Add-in boards and peripheral interfaces (see page 73)
 CNR (communication and networking riser) (optional)
 PCI bus (three)
 AGP Universal
 IDE (two)
 Diskette drive
One Accelerated Graphics Port (expansion slot 7).
Three PCI Local Bus connectors (compliant with PCI Rev. 2.2 specification). The SMBus is
routed to PCI bus connector 2 (expansion slot 5). PCI add-in cards with SMBus support can
access sensor data and other information residing on the desktop board.
One CNR (optional), shared with PCI bus connector 3 (expansion slot 4).
Expansion Slots