MT41J128M8JP-15E:G Micron Technology Inc, MT41J128M8JP-15E:G Datasheet - Page 158

• Manufacturer Part Number: MT41J128M8JP-15E:G
• Description: IC DDR3 SDRAM 1GBIT 78FBGA
• Manufacturer: Micron Technology Inc
• Series: -r
• Type: DDR3 SDRAMr

Specifications of MT41J128M8JP-15E:G

• Format - Memory: RAM
• Memory Type: DDR3 SDRAM
• Memory Size: 1G (128M x 8)
• Speed: 667MHz
• Interface: Parallel
• Voltage - Supply: 1.425 V ~ 1.575 V
• Operating Temperature: 0°C ~ 95°C
• Package / Case: 78-TFBGA
• Organization: 128Mx8
• Density: 1Gb
• Address Bus: 17b
• Maximum Clock Rate: 1.333GHz
• Operating Supply Voltage (typ): 1.5V
• Package Type: FBGA
• Operating Temp Range: 0C to 95C
• Operating Supply Voltage (max): 1.575V
• Operating Supply Voltage (min): 1.425V
• Supply Current: 220mA
• Pin Count: 78
• Mounting: Surface Mount
• Operating Temperature Classification: Commercial
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

RESET
PDF: 09005aef826aa906/Source: 09005aef82a357c3
1Gb_DDR3_4.fm - Rev. F 11/08 EN
The RESET signal (RESET#) is an asynchronous signal that triggers any time it drops
LOW, and there are no restrictions about when it can go LOW. After RESET# goes LOW, it
must remain LOW for 100ns. During this time, the outputs are disabled, ODT (R
off (High-Z), and the DRAM resets itself. CKE should be brought LOW prior to RESET#
being driven HIGH. After RESET# goes HIGH, the DRAM must be reinitialized as though
a normal power up were executed (see Figure 109 on page 159). All refresh counters on
the DRAM are reset, and data stored in the DRAM is assumed unknown after RESET# has
gone LOW.
158
Micron Technology, Inc., reserves the right to change products or specifications without notice.
1Gb: x4, x8, x16 DDR3 SDRAM
©2006 Micron Technology, Inc. All rights reserved.
Operations
TT
) turns