W83697UG Nuvoton Technology Corporation of America, W83697UG Datasheet - Page 41

• Manufacturer Part Number: W83697UG
• Description: IC LPC SUPER I/O 128-PQFP
• Manufacturer: Nuvoton Technology Corporation of America

Specifications of W83697UG

• Applications: PC's, PDA's
• Interface: LPC
• Voltage - Supply: 3.3V, 5V
• Package / Case: 128-XFQFN
• Mounting Type: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Supplier Unconfirmed, Lead free / RoHS Compliant

CRF1 (GP2 data register. Default 0x00 )
If a port is programmed to be an output port, then its respective bit can be read/written.
If a port is programmed to be an input port, then its respective bit can only be read.
CRF2 (GP2 inversion register. Default 0x00 )
When set to a '1', the incoming/outgoing port value is inverted.
When set to a '0', the incoming/outgoing port value is the same as in data register.
CRF3 (GP3 I/O selection register. Default 0xFF )
When set to a '1', respective GPIO port is programmed as an input port.
When set to a '0', respective GPIO port is programmed as an output port.
CRF4 (GP3 data register. Default 0x00 )
If a port is programmed to be an output port, then its respective bit can be read/written.
If a port is programmed to be an input port, then its respective bit can only be read.
CRF5 (GP3 inversion register. Default 0x00 )
When set to a '1', the incoming/outgoing port value is inverted.
When set to a '0', the incoming/outgoing port value is the same as in data register.
CRF6 (GP4 I/O selection register. Default 0xFF )
When set to a '1', respective GPIO port is programmed as an input port.
When set to a '0', respective GPIO port is programmed as an output port.
CRF7 (GP4 data register. Default 0x00 )
If a port is programmed to be an output port, then its respective bit can be read/written.
If a port is programmed to be an input port, then its respective bit can only be read.
CRF8 (GP4 inversion register. Default 0x00 )
When set to a '1', the incoming/outgoing port value is inverted.
When set to a '0', the incoming/outgoing port value is the same as in data register.
6.12 Logical Device A (ACPI)
CR30 (Default 0x00)
CR70 (Default 0x00)
Bit [7:1]: Reserved.
Bit 0:
Bit [7:4]: Reserved.
Bit [3:0]: These bits select IRQ resources for
1
0
Activates the logical device.
Logical device is inactive.
SMI
- 41 -
/
PME
W83697UF/W83697UG
Publication Release Date: May 26, 2005
Revision A1