SI3010-F-GS Silicon Laboratories Inc, SI3010-F-GS Datasheet - Page 45

• Manufacturer Part Number: SI3010-F-GS
• Description: IC ISOMODEM LINE-SIDE 16SOIC
• Manufacturer: Silicon Laboratories Inc

Specifications of SI3010-F-GS

• Data Format: V.92
• Interface: Serial
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 16-SOIC (3.9mm Width)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Baud Rates: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

S0C (MF2). Modem Functions 2
Reset settings = 0000_0000 (0x00)
Bit
6:5
7
4
3
2
1
0
Name
Type
Bit
CIDM[1:0]
Reserved
Reserved
Name
CDE
MLB
BDL
9BF
CDE
R/W
D7
Carrier Detect Enable.
0 = Disable.
1 = Enable GPI02 as an active low carrier detect pin (must also set SE2[3:2]
[GPIO2] = 01).
Caller ID Monitor.
00 = Caller ID monitor disabled.
01 = Caller ID monitor enabled. Si2401 must detect channel seizure signal followed by
marks in order to report caller ID data. (Normal Bellcore caller ID)
10 = Reserved.
11 = Caller ID monitor enabled. Si2401 must only detect marks in order to report caller ID
data.
Read returns zero.
Ninth Bit Function.
Only valid if the ninth bit escape is set S15[0] (NBE).
0 = Ninth bit equivalent to ALERT.
1 = Ninth bit equivalent to HDLC EOFR.
Blind Dialing.
0 = Blind dialing disabled.
1 = Enables blind dialing after dial timeout register S02 (CW) expires.
Modem Loopback.
0 = Not swapped.
1 = Swaps frequency bands in modem algorithm to do a loopback in a test mode.
Read returns zero.
D6
CIDM[1:0]
R/W
D5
Rev. 1.0
D4
Function
9BF
R/W
D3
BDL
R/W
D2
MLB
R/W
D1
Si2401
D0
45