R88A-CTW001N Omron, R88A-CTW001N Datasheet - Page 274
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
R88A-CTW001N
Manufacturer Part Number
R88A-CTW001N
Description
CONTROL CABLE 1M
Manufacturer
Omron
Datasheet
1.R88A-TK02W.pdf
(479 pages)
Specifications of R88A-CTW001N
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
R88ACTW001N
- Current page: 274 of 479
- Download datasheet (5Mb)
Operation
D Operation Procedure
Note 1. The digits you can operate will flash.
Note 2. Change the jog speed setting as described, then perform jog operations as before. Confirm
D Procedure for Changing Settings
Note Do not change any other parameter settings at this stage. Before changing other parameter set-
4-14
(Approx. 1 s later)
• You can use various operations to change the parameter number and parameter settings. Use these
• Try changing the jog speed setting using various different operations.
• The digits that can be changed will flash.
• Press the Up Key to increment the setting, and press the Down Key to decrement the setting.
• Press and hold the keys to increment and decrement rapidly (auto-increment function).
• Press the Left Key (front panel: DATA Key for less than 1 s) to shift the operation digit to the left, and
PR02W
operations as needed to shorten the time required for a setting operation.
Changing the Setting Using the Up and Down Keys
Changing the Setting while Changing the Operation Digits using the Left Key and
Right Keys
press the Right Key to shift the operation digit to the right.
tings, make sure you read and fully understand 4-4 User Parameters.
that the rotation speed is faster than before.
key operation
Front panel
(1 s min.)
(1 s min.)
(1 s min.)
Display example
Press and hold
Press and hold
(System Check Mode)
Press the MODE/SET Key to change to Setting Mode.
Press the Up or Down Key to set parameter number
Pn304. (See note 1.)
Press DATA Key (front panel: DATA Key for 1 s min.).
The parameter number Pn304 setting will be displayed.
Press the Up or Down Key to change the setting to
01000.
Press the DATA Key (front panel: DATA Key for 1 s min.)
to save the data to memory (the setting display will flash
for approximately 1 s).
After the display has finished flashing, it will return to
normal.
Press the DATA Key (front panel: DATA Key for 1 s min.)
to return to the parameter number display.
Display differs depending on the timing
when the key is released
Explanation
Chapter 4