WLNG-EK-DP551 Quatech, WLNG-EK-DP551 Datasheet - Page 7
![no-image](/images/no-image-200.jpg)
WLNG-EK-DP551
Manufacturer Part Number
WLNG-EK-DP551
Description
WiFi / 802.11 Modules & Development Tools AIRBORNE EVAL KIT EMBEDDED MODULES
Manufacturer
Quatech
Series
Airborne™r
Type
Transceiver, 802.11 b/gr
Datasheets
1.WLNG-AN-DP551.pdf
(2 pages)
2.WLNG-EK-DP551.pdf
(8 pages)
3.WLNG-EK-DP551.pdf
(62 pages)
Specifications of WLNG-EK-DP551
Mfg Application Notes
Transition to DP550 Devices AppNote
Frequency
2.4GHz ~ 2.4835GHz
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
For Use With/related Products
Airborne Modules
Quatech, Inc
3.
4.
5.
100-8002-110
Determine and Store the Access Point SSID
On the Host computer, use the terminal emulation program to type the following CLI
commands in the order shown:
If your access point has security enabled, you will also need to use the CLI to enter
those parameters (See the CLI Reference Guide for details). That setup is outside the
scope of this quick-start guide, which assumes that the AP being used has no security.
After issuing the commands, press the reset switch (SW2) on the EVB. The EVB restarts
and the RF_ACT LED turn on solid to show that the module has connected to the AP.
You will need to reconnect the Telnet session after each reset or restart.
Determine the Module’s IP address
On the Host computer, use the terminal emulation program to type the following CLI
commands:
Accessing the Module Using Telnet
On the Remote computer, use HyperTerminal to start a Telnet session. In the first
screen, name the session ‘TCP <Module IP>’ (for reference purposes only), click on any
icon you want to associate with this Telnet session, and click OK. In the next screen,
click TCP/IP (Winsock) for Connect Using. In the Host Address field, type the module’s
IP address. Leave the default Port Number value of 23 and click OK.
CLI Command
wl-scan<CR>
wl-ssid [SSID]<CR>
commit<CR>
CLI Command
auth dpac dpac <CR>
wl-ip<CR>
7
Description
The module scans for APs and returns
information on each one it discovers. Note the
SSID value that is returned, as you will need to
enter it in the next command
Associates the module with the AP who’s [SSID]
you specify. [SSID] is the value returned by the
wl-scan command.
Stores the information to flash memory.
Description
Authenticate with the firmware
The module returns the IP address assigned to it
by the AP.
Enterprise Eval Kit Quick Start Guide
Connect with Reliability