WLNG-EK-DP551 Quatech, WLNG-EK-DP551 Datasheet - Page 6
![no-image](/images/no-image-200.jpg)
WLNG-EK-DP551
Manufacturer Part Number
WLNG-EK-DP551
Description
WiFi / 802.11 Modules & Development Tools AIRBORNE EVAL KIT EMBEDDED MODULES
Manufacturer
Quatech
Series
Airborne™r
Type
Transceiver, 802.11 b/gr
Datasheets
1.WLNG-AN-DP551.pdf
(2 pages)
2.WLNG-EK-DP551.pdf
(8 pages)
3.WLNG-EK-DP551.pdf
(62 pages)
Specifications of WLNG-EK-DP551
Mfg Application Notes
Transition to DP550 Devices AppNote
Frequency
2.4GHz ~ 2.4835GHz
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
For Use With/related Products
Airborne Modules
Quatech, Inc
Ethernet Bridge Connection
If you have purchased the WLNG-EK-DP503 kit, please use the following instructions for
connecting to and evaluating the Airborne Ethernet Bridge Module.
1.
2.
100-8002-110
Connect a Host Computer
Using a Cat5 cable, connect the RJ45 port (CN4) connector on the Airborne EVB to the
Ethernet port on the Host computer. First make sure the Host PC has the IP address of
its Ethernet port set to be assigned by DHCP or assigned a static address of
192.168.2.100.
Interacting with the Airborne™ Module
On the Host computer, use HyperTerminal to start a Telnet session. In the first screen,
name the session Wired Telnet (for reference purposes only), click on any icon you want
to associate with this Telnet session, and click OK. In the next screen, click TCP/IP
(Winsock) for Connect Using. In the Host Address field, enter the IP address
192.168.2.1. Leave the default Port Number value of 23 and click OK. Use the terminal
emulation program to interact with the module by issuing command Line Interface (CLI)
commands. CLI commands let you request status or change parameter settings. Press
the Enter key (<CR>) after each command line you type. After the module starts, type
the following CLI command to log in (You must log in before CLI commands can be
recognized):
CLI Command
auth dpac dpac <CR>
You will have to log into the module after any reset or restart
6
Description
The module responds with OK, indicating that it
executed the command successfully. (If you did
not receive OK, check the settings in your
terminal emulation program.
Enterprise Eval Kit Quick Start Guide
Connect with Reliability