DP83848CVV/NOPB National Semiconductor, DP83848CVV/NOPB Datasheet - Page 37

• Manufacturer Part Number: DP83848CVV/NOPB
• Description: IC TXRX ETHERNET PHYTER 48-LQFP
• Manufacturer: National Semiconductor
• Type: Transceiverr

Specifications of DP83848CVV/NOPB

• Number Of Drivers/receivers: 1/1
• Protocol: Ethernet
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 48-LQFP
• For Use With: DP83848C-POE-EK - BOARD EVALUATION DP83848CDP83848C-MAU-EK - BOARD EVALUATION DP83848C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: *DP83848CVV; *DP83848CVV/NOPB; DP83848CVV; DP83848CVVNOPB; DP83848CVVNOPB; DP83848CVVNOPBTR; DP83848CVVNOPBTR

6.0 Reset Operation
The DP83848C includes an internal power-on reset (POR)
function and does not need to be explicitly reset for normal
operation after power up. If required during normal opera-
tion, the device can be reset by a hardware or software
reset.
6.1 Hardware Reset
A hardware reset is accomplished by applying a low pulse
(TTL level), with a duration of at least 1
RESET_N. This will reset the device such that all registers
will be reinitialized to default values and the hardware con-
s, to the
37
figuration values will be re-latched into the device (similar
to the power-up/reset operation).
6.2 Software Reset
A software reset is accomplished by setting the reset bit
(bit 15) of the Basic Mode Control Register (BMCR). The
period from the point in time when the reset bit is set to the
point in time when software reset has concluded is approx-
imately 1 s.
The software reset will reset the device such that all regis-
ters will be reset to default values and the hardware config-
uration values will be maintained. Software driver code
must wait 3 s following a software reset before allowing
further serial MII operations with the DP83848C.
www.national.com