DTX-1800 120 FLUKE NETWORKS, DTX-1800 120 Datasheet - Page 2

• Manufacturer Part Number: DTX-1800 120
• Description: Cable Analyzer
• Manufacturer: FLUKE NETWORKS
• Type: Networkr

* The battery will not charge at temperatures outside of 0° C to 45° C (32° F to 113° F). The battery charges at a reduced rate between 40° C and 45° C (104° F and 113° F).
DTX CableAnalyzer
Cable Types
Shielded and unshielded twisted pair LAN cabling
(STP, FTP, SSTP, and UTP)
Note: For availability of additional adapters that allow testing to other performance
standards, different cabling types, or fiber optic cabling, contact Fluke Networks.
Standard Link Interface Adapters
Cat 6A/Class EA permanent link adapters
Cat 6/Class E channel adapters
Test Standards
TIA
ISO/IEC
EN
ANSI
IEEE 802.3
IEEE 802.5
General Specifications
Speed of Autotest
Supported test parameters
The selected test standard determines the test parameters
and the frequency range of the tests
Cable tone generator
Display
Input protection
Case
Dimensions
Weight
Power
Languages supported
Calibration
Main unit and remote:
Typical battery life:
Charge time* (with tester off):
AC adapter/charger, USA version:
AC adapter/charger, international version:
Memory backup power in main unit:
Typical life of lithium battery:
™
Series Specifications
TIA Category 3, 4, 5, 5e, and 6A: 100 Ω
ISO/IEC Class C and D: 100 Ω and 120 Ω
ISO/IEC Class E, Class EA, Class F and Class FA: 100 Ω
Plug type: shielded Cat 6A centered 8-pin modular plug (RJ45)
Plug life: > 8000 insertions
Tests supported: shielded and unshielded cable, TIA Cat 3, 4, 5, 5e, and 6 and ISO/IEC Class C, D
and EA permanent link
Plug type: shielded 8-pin modular socket (RJ45)
Plug life: >10,000 insertions
Tests supported: shielded and unshielded cable, TIA Cat 3, 4, 5, 5e, 6, and 6A and ISO/IEC Class C,
D, EA channels
Category 3 and Category 5e per TIA/EIA-568B
Category 5 (1000BASE-T) per TIA TSB-95
Category 6 per TIA/EIA-568B.2-1 (Addendum #1 to TIA/EIA-568B.2)
Category 6A per TIA/EIA-568B.2-10
11801 Class C, D and E
11801-2000 Class C, D and E, 11801 Amd 1 Class EA channel; Amd 2 Class EA permanent link
11801 Class F (DTX-1800 only)
50173 Class C, D ,E
50173 Class F (DTX-1800 only)
TP-PMD
10BASE-T, 100BASE-TX, 1000BASE-T, 10GBASE-T
(STP cabling, IBM Type 1, 150 Ω) Token Ring, 4 Mbps and 16 Mbps
Full 2-way Autotest of Category 6 Twisted-Pair links: 9 seconds or less
Full 2-way Autotest of ISO/IEC Class F links: 25 seconds
Wire Map, Length, Propagation Delay, Delay Skew, DC Loop Resistance, Insertion Loss (Attenution),
Return Loss (RL), RL @ Remote, NEXT, NEXT @ Remote, Attenuation-to-Crosstalk Ratio, ACR-N @
Remote, ARC from the far end (ACR-F) formerly named ELFEXT, ACR-F @ Remote, Power Sum, NEXT
(PS NEXT), PSNEXT @ Remote, Power Sum ACR-N, PSACR @ Remote, Power Sum ACR-F (PS ACR-F)
and PS ACR-F @ Remote.
Generates tones that can be detected by a tone probe such as a Fluke Networks IntelliTone™ probe.
The tones are generated on all pairs. Frequency range of tones: 440 Hz to 831 Hz
3.7 in (9.4 cm) diagonal, 240 dots wide by 320 dots high, passive color, transmissive LCD
with backlight.
Protected against continuous telco voltages and 100 mA over-current. Occasional ISDN
over-voltages will not cause damage
High impact plastic with shock absorbing overmold
Main unit and Smart Remote: 8.5 in x 4.4 in x 2.4 in (21.6 cm x 11.2 cm x 6 cm), nominal
2.4 lb (1.1 kg), nominal (without adapter or module)
Lithium-ion battery pack, 7.4 V, 4000 mAh
12 to 14 hours
4 hours (below 40° C)
Linear power supply; Input 108 V ac to 132 V ac, 60 Hz ; Output 15 V dc, 1.2 A
Switching power supply; Input 90 V ac to 264 V ac, 47 to 63 Hz; Output 15 V dc, 1.2 A
(isolated output)
Lithium battery
5 years
English, French, German, Spanish, Portuguese, Italian, Japanese, and Simplified Chinese
Service center calibration period is 1 year