ISE30A-N01-P-L SMC Corporation, ISE30A-N01-P-L Datasheet - Page 5

• Manufacturer Part Number: ISE30A-N01-P-L
• Description: Sensor, High-Precision Digital Pressure (positive), 1-PNP Open Collector Output
• Manufacturer: SMC Corporation

Specifications of ISE30A-N01-P-L

• Display: 4-Digit, 7 Segment, 2-Color LCD (red/green)
• Function: High Precision, Digital Positive Pressure Sensor
• Ip Rating: IP 40
• Mounting Type: Panel or Bracket
• Output: 1 - PNP Open Collector
• Primary Type: Pressure
• Range, Measurement: -0.100 to 1.000 MPa
• Sensing Mode: Air, Non-Corrosive Gas, Non-Flammable Gas
• Termination: Lead Wire, Oilproof Heavy Duty Vinyl Cable
• Voltage, Supply: 12 to 24 VDC

Analog Output
Voltage output
Descriptions
Functions
Copy function
Auto-preset function
Precision indicator setting function
Peak display function
Bottom display function
Key lock function (Security code
input can be selected.)
Zero-out function
Anti-chattering function
Unit display switching function
Power-saving mode
Display resolution-switch function
kPa⇔MPa switch function
Displays present unit (only for units of kPa and
MPa).
Lights up when switch output (OUT1) is turned ON.
Use this button to select the mode or increase the
ON/OFF set-value.
It is also used for switching to the peak display
mode.
Use this button to change the mode or confirm the
set-value.
Unit display
Output (OUT1) display (Green)
S button (SET)
A
5
1
B
button (UP)
0.6
High-Precision Digital Pressure Switch
(Refer to pages 10 and 11 for details.)
C
Pressure
Prevents possible malfunction due to sudden fluctuations in the primary pressure by adjusting the response time.
Current output
Calculates and enters rough set values automatically from the actual operating conditions.
20
A
2-Color Display
The pressure display can be set at zero when the pressure is open to the atmosphere.
The key board can be locked to prevent any incorrect function of the operation switch.
4
B
2.4
Can retain the maximum pressure value displayed during measurement.
Can retain the minimum pressure value displayed during measurement.
Converts display resolution from the normal value of 1/1000 to 1/100.
Copies the settings of the master sensor to the slave sensors.
Evens out deviations in the displayed value.
Converts the unit between kPa and MPa.
C
Series
For vacuum
pressure
For compound
pressure
For positive
pressure
Pressure
It reduces the monitor to flicker.
Can convert the display value.
Reduces power consumption.
Range
ZSE30A
Rated pressure range
Displays the current pressure, set mode, and error
code. Always use red or green display; or switch
between green and red according to the output.
Four different display settings are available.
Lights up when switch output (OUT2) is turned ON.
Use this button to select the mode or decrease the
ON/OFF set-value.
It is also used for switching to the bottom display
mode.
–0.100 to 1.000 MPa
–100.0 to 100.0 kPa
0.0 to –101.0 kPa
LCD
Output (OUT2) display (Red)
button (DOWN)
(
–0.1 kPa
F
—
—
A
)
/ISE30A
–100 kPa 100 kPa
B
0
0
–101 kPa
1 MPa
C
3