PIC18LF452-I/PT Microchip Technology Inc., PIC18LF452-I/PT Datasheet - Page 120

• Manufacturer Part Number: PIC18LF452-I/PT
• Description: 44 PIN, 32 KB FLASH, 1536 RAM, 34 I/O
• Manufacturer: Microchip Technology Inc.

Specifications of PIC18LF452-I/PT

• A/d Inputs: 8-Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 10 MIPS
• Eeprom Memory: 256 Bytes
• Input Output: 36
• Interface: I2C/SPI/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 44-pin TQFP
• Programmable Memory: 32K Bytes
• Ram Size: 1.5K Bytes
• Speed: 40 MHz
• Timers: 1-8-bit, 3-16-bit
• Voltage, Range: 2-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

PIC18FXX2
14.1
Capture/Compare/PWM Register 1 (CCPR1) is com-
prised of two 8-bit registers: CCPR1L (low byte) and
CCPR1H (high byte). The CCP1CON register controls
the operation of CCP1. All are readable and writable.
TABLE 14-1:
TABLE 14-2:
DS39564B-page 118
CCPx Mode CCPy Mode
Compare
Capture
Capture
PWM
PWM
PWM
CCP Mode
Compare
Capture
CCP1 Module
PWM
Compare
Compare
Compare
Capture
Capture
CCP MODE - TIMER
RESOURCE
INTERACTION OF TWO CCP MODULES
PWM
TMR1 or TMR3 time-base. Time-base can be different for each CCP.
which clears either TMR1 or TMR3 depending upon which time-base is used.
The compare(s) could be configured for the special event trigger,
which clears TMR1 or TMR3 depending upon which time-base is used.
(TMR2 interrupt).
None
The compare could be configured for the special event trigger,
The PWMs will have the same frequency and update rate
None
Timer1 or Timer3
Timer1 or Timer3
Timer Resource
Timer2
14.2
Capture/Compare/PWM Register2 (CCPR2) is com-
prised of two 8-bit registers: CCPR2L (low byte) and
CCPR2H (high byte). The CCP2CON register controls
the operation of CCP2. All are readable and writable.
Interaction
CCP2 Module
2002 Microchip Technology Inc.