SYJ314-5MZ-M5 SMC Corporation, SYJ314-5MZ-M5 Datasheet - Page 54

• Manufacturer Part Number: SYJ314-5MZ-M5
• Description: Solenoid Valve; 3 port; normally closed; base mt; 24VDC; M plug conn w/.3 lead
• Manufacturer: SMC Corporation
• Type: Direct Operatedr

Specifications of SYJ314-5MZ-M5

• Brand/series: SY Series
• Configuration: 2-Position Single
• Number Of Ports: 3
• Primary Type: Solenoid Valve
• Voltage, Coil: 24 VDC

í Non-locking push type [Standard]
í Push-turn slotted locking type [Type D]
í Push-turn lever locking type [Type E]
When the manual override is operated, connected equipment will
be actuated. Confirm safety before operating.
4-4-56
Press in the direction of the arrow
While pressing, turn in the direction of the arrow.
If it is not turned, it can be operated the same way as the non-
locking type.
When operating the locking type D with a screw driver, turn it
gently using a watchmakers’ screwdriver.
[Torque: Less than 0.1 N . m]
While pressing, turn in the direction of the arrow.
If it is not turned, it can be operated the same way as the non-
locking type.
When locking the manual override on the push-turn locking
types (D, E), be sure to push it down before turning.
Turning without first pushing it down can cause damage to the
manual override and trouble such as air leakage, etc.
Warning
Caution
Caution
Manual Override Operation
Series
Specific Product Precautions 1
Be sure to read before handling.
SYJ300/500/700
Locked position
Locked position
For bracket attached styles of SYJ300, do not use it without
bracket.
Solenoid valves with grommet and L/M type plug connector AC
specifications have a built-in rectifier circuit in the pilot section to
operate the DC coil.
With 200 V, 220 VAC specification pilot valves, this built-in
rectifier generates heat when energized. The surface may
become hot depending on the energized condition; therefore, do
not touch the solenoid valves.
Pilot air is exhausted through the main valve body rather than
directly to atmosphere.
• Suitable for applications where exhausting the pilot valve to
• For use in extremely dirty environments where there is the
Ensure that the piping of exhaust air is not too restrictive.
Solenoid Valve for 200 V, 220 VAC Specifications
Common Exhaust Type for Main and Pilot Valve
atmosphere would be detrimental to the surrounding working
environment.
possibility that dust could enter the pilot exhaust and damage
the valve.
Warning
Caution
Caution
Bracket